Qtech QSW-8200-52T-AC — настройка VLAN: Руководство по конфигурации и командам [32/41]

Превью страниц Страница 32 / 41

User Manual

Chapter 1. VLAN Configuration 32

www.qtech.ru

 Switch(Config-If-Ethernet1/0/1)# vlan-translation n-to-1 1-5 to 100

 Switch(config)#interface ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)# switchport mode trunk

1.4.2 show vlan-translation n-to-1

 Command: show vlan-translation n-to-1 [<interface-name>]

 Function: Show the port configuration with Multi-to-One VLAN translation.

 Parameter: interface-name: Specify the name of the port which will be shown. If there

is no parameter, show all port configurations with this function.

 Command Mode: Admin mode.

 Default: There is no Multi-to-One VLAN translation information.

 Usage Guide: show

 The access ports of the switch can not support this function.

 Example: Show all port configurations with Multi-to-One VLAN translation function.

 Switch# show vlan-translation n-to-1

 Interface Ethernet1/0/1:

 vlan-translation n-to-1 enable, vlan 1-4 to 100

 vlan-translation n-to-1 enable,vlan 5-8;13 to 101

 Interface Ethernet1/0/2:

 vlan-translation n-to-1 enable,vlan 1-4 to 100

1.5 Commands for Super VLAN

1.5.1 supervlan

 Command: supervlan

 no supervlan

 Function: Set VLAN as super vlan, the no command restores the default configuration.

 Parameter: None.

 Command Mode: VLAN Configuration Mode.

 Default: No configuration.

 Usage Guide: Set VLAN (except SUB VLAN) as super vlan. Super vlan will be filtered

automatically when setting trunk port and any port can not belong to it.

 Example: Set vlan2 as supervlan.

 Swithc#config

 Switch(config)#vlan 2

 Switch (config-vlan2)#supervlan

1.5.2 subvlan

 Command: subvlan WORD

 no subvlan {WORD | all}

 Function: Set VLAN as subvlan, the no command restores the default configuration.