Qtech QSW-8200-52T-AC — руководство пользователя по настройке VLAN для сетевых устройств [16/41]

Превью страниц Страница 16 / 41

User Manual

Chapter 1. VLAN Configuration 16

www.qtech.ru

 Ethernet1/0/12

 Ethernet1/0/13

 101 VLAN0101 Community 100 Ethernet1/0/9 Ethernet1/0/10

 Ethernet1/0/11 Ethernet1/0/12

 Ethernet1/0/13

 102 VLAN0102 Isolate 100 Ethernet1/0/9

1.1.27 show vlan-translation

 Command: show vlan-translation

 Function: Show the related configuration of vlan-translation.

 Parameter: None.

 Command mode: Admin mode.

 Usage Guide: Show the related configuration of vlan-translation.

 The access ports of the switch can not support this function.

 Example: Show the related configuration of vlan-translation.

 Switch#show vlan-translation

 Interface Ethernet1/0/1:

 vlan-translation is enable, miss drop is not set

 vlan-translation 5 to 10 in

 Interface Ethernet1/0/2:

 vlan-translation is enable, miss drop is set both

 vlan-translation 6 to 12 out

1.1.28 switchport access vlan

 Command: switchport access vlan <vlan-id>

 no switchport access vlan

 Function: Add the current Access port to the specified VLAN. The “no switchport access

vlan” command deletes the current port from the specified VLAN, and the port will be

partitioned to VLAN1.

 Parameter: <vlan-id> is the VID for the VLAN to be added the current port, valid range

is 1 to 4094.

 Command mode: Port Mode.

 Default: All ports belong to VLAN1 by default.

 Usage Guide: Only ports in Access mode can join specified VLANs, and an Access port

can only join one VLAN at a time.

 Example: Add some Access port to VLAN100.

 Switch(config)#interface ethernet 1/0/8

 Switch(Config-If-Ethernet1/0/8)#switchport mode access

 Switch(Config-If-Ethernet1/0/8)#switchport access vlan 100

 Switch(Config-If-Ethernet1/0/8)#exit