Qtech QSW-8200-52T-AC Команды настройки vlan онлайн [18/41] 481623

User Manual

Chapter 1. VLAN Configuration 18

www.qtech.ru

 untag: Join the specific VLAN with untag mode.

 Command mode: Port Mode.

 Default: Deny all VLAN traffic to pass.

 Usage Guide: The user can use this command to set the VLANs whose traffic allowed to

pass through the Hybrid port, traffic of VLANs not included are prohibited. The

difference between tag and untag mode by setting allowed vlan: set VLAN to untag

mode, the frame sent via hybrid port without VLAN tag; set VLAN to tag mode, the

frame sent via hybrid port with corresponding VLAN tag. The same VLAN can not be

allowed with tag and untag mode by a Hybrid port at the same time. If configure the

tag (or untag) allowed VLAN to untag (or tag) allowed VLAN, the last configuration will

cover the previous.

 Example: Set hybrid port allowed vlan 1, 3, 5-20 with untag mode and allow vlan 100;

300; 500-2000 with tag mode.

 Switch(config)#interface ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)#switchport mode hybrid

 Switch(Config-If-Ethernet1/0/5)#switchport hybrid allowed vlan 1;3;5-20 untag

 Switch(Config-If-Ethernet1/0/5)#switchport hybrid allowed vlan 100;300;500-2000 tag

 Switch(Config-If-Ethernet1/0/5)#exit

1.1.32 switchport hybrid native vlan

 Command: switchport hybrid native vlan <vlan-id>

 no switchport hybrid native vlan

 Function: Set the PVID for Hybrid port; the “no switchport hybrid native vlan”

command restores the default setting.

 Parameter: <vlan-id> is the PVID of Hybrid port.

 Command mode: Port Mode.

 Default: The default PVID of Hybrid port is 1.

 Usage Guide: When an untagged frame enters a Hybrid port, it will be added a tag of

the native PVID which is set by this command, and is forwarded to the native VLAN.

 Example: Set the native vlan to 100 for a Hybrid port.

 Switch(config)#interface ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)#switchport mode hybrid

 Switch(Config-If-Ethernet1/0/5)#switchport hybrid native vlan 100

 Switch(Config-If-Ethernet1/0/5)#exit

1.1.33 switchport interface

 Command: switchport interface [ethernet | portchannel] [<interface-name |

interface-list>]

 no switchport interface [ethernet | portchannel] [<interface-name |

interface-list>]

 Function: Specify Ethernet port to VLAN; the no command deletes one or one set of

ports from the specified VLAN.