Qtech QSW-8200-52T-AC-DC [9/20] Ntp disable

Превью страниц Страница 9 / 20

User Manual

Chapter 2. Commands for NTP 9

www.qtech.ru

 Default: Disabled.

 Command Mode: vlan Configuration Mode.

 Usage Guide: None.

 Example: Enable the function of VLAN1 interface to receive NTP broadcast packets.

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)#ntp broadcast client

2.11 ntp broadcast server count

 Command: ntp broadcast server count <number>

 no ntp broadcast server count

 Function: Set the max number of broadcast or multicast servers supported by the NTP

client. The no operation will cancel the configuration and restore the default value.

 Parameters: number：1-100, the max number of broadcast servers.

 Default: The default max number of broadcast servers is 50.

 Command Mode: Global Mode.

 Examples: Configure the max number of broadcast servers is 70 on the switch.

 Switch(config)#ntp broadcast server count 70

2.12 ntp disable

 Command: ntp disable

 no ntp disable

 Function: To disable/enable the NTP function on port.

 Parameter: None.

 Default: To enable NTP function on all ports.

 Command Mode: vlan Configuration Mode.

 Usage Guide: None.

 Example: To disable the NTP function on vlan1 interface.

 Switch(config)# interface vlan 1

 Switch(Config-if-Vlan1)#ntp disable

2.13 ntp enable

 Command: ntp enable

 ntp disable

 Function: To enable/disable NTP function globally.

 Parameter: None.

 Default: Disabled.

 Command Mode: Global Mode.

 Usage Guide: None.

 Example: To enable NTP function.

 Switch(config)#ntp enable