Qtech QSW-8200-52T-POEAC- DC Команды для poe онлайн [9/10] 481625

User Manual

Chapter 1. Commands for PoE 9

www.qtech.ru

faulty: PD detection failed

deny: not enough available power or the required power is over

the limit

Power

The power used by the port currently

Max

The max power allowed to be distributed to the port

Current

The present current of the port

Volt

The present voltage of the port

Priority

The Power supply priority

Critical: the highest-level priority

High: the high-level priority

Low: the low-level priority

Class

Class Usage PD Input Power (W)

0 Default 0.44~12.95

1 Optional 0.44~3.84

2 Optional 3.84~6.49

3 Optional 6.49~12.95

4 Reserved treated as class 0 and reserved for future use

It is impossible for a compatible PD to provide a class 4 signal

 Examples: Display the current PoE status on port 1 to port 6.

 Switch# show power inline interface ethernet 1/0/1-6

 Interface Status Oper Power(mW) Max(mW) Current(mA) Volt(V) Priority Class

 ------------ ------- ------ --------- ------- ----------- ------- -------- -----

 Ethernet1/0/1 enable off 0 15400 0 0 high 0

 Ethernet1/0/2 enable off 0 15400 0 0 low 0

 Ethernet1/0/3 enable off 0 15400 0 0 low 0

 Ethernet1/0/4 enable off 0 15400 0 0 low 0

 Ethernet1/0/5 enable off 0 15400 0 0 low 0

 Ethernet1/0/6 enable off 0 15400 0 0 low 0