Qtech QSW-8200-28T-AC-DC Команды интерфейса уровня 3 онлайн [11/47] 481627

User Manual

Chapter 1. Commands for Layer 3 Forwarding 11

www.qtech.ru

1.2.12 debug ipv6 icmp

 Command: debug ipv6 icmp

 no debug ipv6 icmp

 Function: ICMP data packets receive/send debug message.

 Parameter: None

 Default: None

 Command Mode: Admin Mode

 Usage Guide: None

 Example:

 Switch#debug ipv6 icmp

 IPv6 ICMP: sent, type <129>, src <2003::1>, dst <2003::20a:ebff:fe26:8a49> from Vlan1

Displayed information

Explanation

IPv6 ICMP: sent

Send IPv6 data report

type <129>

Ping protocol No.

Src <2003::1>

Source IPv6 address

Dst <2003::20a:ebff:fe26:8a49>

Destination IPv6 address

from Vlan1

Layer 3 port being sent

1.2.13 debug ipv6 nd

 Command: debug ipv6 nd [ ns | na | rs | ra | redirect ]

 no debug ipv6 nd [ ns | na | rs | ra | redirect ]

 Function: Enable the debug of receiving and sending operations for specified types of

IPv6 ND messages. The ns, na, rs, ra and redirect parameters represent neighbor

solicitation, neighbor advertisement, route solicitation, route advertisement and route

redirect. No specification means to enable the debug for all five types of ND message.

The no operation of this command will disable debug of receiving and sending

operations for specified types of IPv6 ND messages, while no specification means to

disable that for all five types of ND message.

 Parameter: None.

 Default: The debug of receiving and sending operations for all five types of IPv6 ND

messages is disabled by default.

 Command Mode: Admin Mode

 Usage Guide: The ND protocol is an essential part of IPv6. This command can display

the ND message of a specified type for troubleshooting.

 Example: