Qtech QSW-8200-28T-AC-DC Команды интерфейса уровня 3 онлайн [12/47] 481627

User Manual

Chapter 1. Commands for Layer 3 Forwarding 12

www.qtech.ru

 Switch#debug ipv6 nd

 IPv6 ND: rcvd, type <136>, src <fe80::203:fff:fe01:2786>, dst <fe80::203:fff:fe01:59ba>

Displayed information

Explanation

IPv6 ND: rcvd

Receive ND data report

type <136>

ND Type

src <fe80::203:fff:fe01:2786>

Source IPv6 address

dst <fe80::203:fff:fe01:59ba>

Destination IPv6 address

1.2.14 debug ipv6 tunnel packet

 This command is not supported by this switch.

1.2.15 description

 This command is not supported by this switch.

1.2.16 ipv6 proxy enable

 Command: ipv6 proxy enable

 no ipv6 proxy enable

 Function: This command enable the IPv6 proxy function of a chassis switch. The no

operation of this command will disable IPv6 proxy function.

 Parameter: None.

 Command Mode: Global Configuration Mode.

 Default: The IPv6 proxy function in the system is disabled by default.

 Usage Guide: IPv6 proxy function means that, the board cards supporting IPV4 only

will forward the IPv6 packets to the IPV6-supporting board cards in the system,

implementing a process of wire-speed forwarding. The proxy provided by IPv6 board

cards indirectly realizes the Ipv6 hardware routing and forwarding function

implemented by earlier board cards which only support IPv4.

 Notice: If the IPv6 proxy function is enabled, at least one board cards supporting IPv6

hardware forwarding should be plugged into the chassis switch. If all board cards in the

chassis switch support IPv6 hardware forwarding, there would be no need to use the

IPv6 proxy function. At present, the IPv6 proxy function does not support the proxy

forwarding of IPv6 tunnel messages and multicast data messages.

 Example: Enable the IPv6 proxy function.

 Switch(config)#ipv6 proxy enable