Qtech QSW-8200-28T-POEAC- DC Команды для протокола многоадресной рассылки онлайн [10/39] 481628

User Manual

Chapter 1. IPv4 Multicast Protocol 10

www.qtech.ru

1.1.11 show ip multicast destination-control

 Command: show ip multicast destination-control [detail]

 show ip multicast destination-control interface <Interfacename> [detail]

 show ip multicast destination-control host-address <ipaddress> [detail]

 show ip multicast destination-control <vlan-id> <mac-address> [detail]

 Function: Display multicast destination control

 Parameter: detail: expresses if it display information in detail or not..

 <Interfacename>: interface name or interface aggregation name, such as

Ethernet1/0/1, port-channel 1 or ethernet1/0/1.

 Default: None

 Command Mode: Admin Mode and Global Mode

 Usage Guide: The command displays multicast destination control rules of

configuration, including detail option, and access-list information applied in detail.

 Example:

 Switch (config)#show ip multicast destination-control

 ip multicast destination-control is enabled

 ip multicast destination-control 11.0.0.0/8 access-group 6003

 ip multicast destination-control 1 00-03-05-07-09-11 access-group 6001

 multicast destination-control access-group 6000 used on interface Ethernet1/0/13

 switch(config)#

1.1.12 show ip multicast destination-control access-list

 Command: show ip multicast destination-control access-list

 show ip multicast destination-control access-list <6000-7999>

 Function: Display destination control multicast access-list of configuration.

 Parameter: <6000-7999>: access-list number.

 Default: None

 Command Mode: Admin Mode and Global Mode

 Usage Guide: The command displays destination control multicast access-list of

configuration.

 Example:

 Switch# sh ip multicast destination-control acc

 access-list 6000 deny ip any any-destination

 access-list 6000 deny ip any host-destination 224.1.1.1

 access-list 6000 deny ip host 2.1.1.1 any-destination

 access-list 6001 deny ip host 2.1.1.1 225.0.0.0 0.255.255.255

 access-list 6002 permit ip host 2.1.1.1 225.0.0.0 0.255.255.255

 access-list 6003 permit ip 2.1.1.0 0.0.0.255 225.0.0.0 0.255.255.255

1.1.13 show ip multicast policy

 Command: show ip multicast policy