Qtech QSW-8200-28T-POEAC- DC Команды для протокола многоадресной рассылки онлайн [7/39] 481628

User Manual

Chapter 1. IPv4 Multicast Protocol 7

www.qtech.ru

 Default: None

 Command Mode: Interface Configuration Mode

 Usage Guide: The command is only working under global multicast destination-control

enabled, after configuring the command, if IGMP-SPOOPING is enabled, for adding the

interface to multicast group, and match configured access-list, such as matching:

permit, the interface can be added, otherwise do not be added.

 Example:

 Switch(config)#inter e 1/0/4

 Switch(Config-If-Ethernet 1/0/4)#ip multicast destination-control access-group 6000

 Switch (Config-If-Ethernet1/0/4)#

1.1.5 ip multicast destination-control access-group (sip)

 Command: ip multicast destination-control <IPADDRESS/M> access-group <6000-

7999>

 no ip multicast destination-control <IPADDRESS/M> access-group

<6000-7999>

 Function: Configure multicast destination-control access-list used on specified net

segment, the “no ip multicast destination-control <IPADDRESS/M> access-group

<6000-7999>” command deletes this configuration.

 Parameter: <IPADDRESS/M>: IP address and mask length;

 <6000-7999>: Destination control access-list number.

 Default: None

 Command Mode: Global Mode

 Usage Guide: The command is only working under global multicast destination-control

enabled, after configuring the command, if IGMP-SPOOPING or IGMP is enabled, for

adding the members to multicast group. If configuring multicast destination-control on

specified net segment of transmitted igmp-report, and match configured access-list,

such as matching permit, the interface can be added, otherwise do not be added. If

relevant group or source in show ip igmp groups detail has been established before

executing the command, it needs to execute clear ip igmp groups command to clear

relevant groups in Admin mode.

 Example:

 Switch(config)#ip multicast destination-control 10.1.1.0/24 access-group 6000

1.1.6 ip multicast destination-control access-group (vmac)

 Command: ip multicast destination-control <1-4094> <macaddr >access-group <6000-

7999>

 no ip multicast destination-control <1-4094> <macaddr >access-group

<6000-7999>

 Function: Configure multicast destination-control access-list used on specified vlan-

mac, the “no ip multicast destination-control <1-4094> <macaddr >access-group

<6000-7999>”command deletes this configuration.