Qtech QSW-8200-28T-POEAC- DC [35/114] Dot1x accept mac

User Manual

Chapter 2. Commands for 802.1x 35

www.qtech.ru

2.5 dot1x accept-mac

 Command: dot1x accept-mac <mac-address> [interface <interface-name>]

 no dot1x accept-mac <mac-address> [interface <interface-name>]

 Function: Add a MAC address entry to the dot1x address filter table. If a port is

specified, the entry added applies to the specified port only. If no port is specified, the

entry added applies to all the ports. The “no dot1x accept-mac <mac-address>

[interface <interface-name>]” command deletes the entry from dot1x address filter

table.

 Parameters: <mac-address> stands for MAC address;

 <interface-name> for interface name and port number.

 Command mode: Global Mode.

 Default: N/A.

 Usage Guide: The dot1x address filter function is implemented according to the MAC

address filter table, dot1x address filter table is manually added or deleted by the user.

When a port is specified in adding a dot1x address filter table entry, that entry applies

to the port only; when no port is specified, the entry applies to all ports in the switch.

When dot1x address filter function is enabled, the switch will filter the authentication

user by the MAC address. Only the authentication request initialed by the users in the

dot1x address filter table will be accepted, the rest will be rejected.

 Example: Adding MAC address 00-01-34-34-2e-0a to the filter table of Ethernet 1/0/5.

 Switch(config)#dot1x accept-mac 00-01-34-34-2e-0a interface ethernet 1/0/5

2.6 dot1x eapor enable

 Command: dot1x eapor enable

 no dot1x eapor enable

 Function: Enables the EAP relay authentication function in the switch; the “no dot1x

eapor enable” command sets EAP local end authentication.

 Command mode: Global Mode.

 Default: EAP relay authentication is used by default.

 Usage Guide: The switch and RADIUS may be connected via Ethernet or PPP. If an

Ethernet connection exists between the switch and RADIUS server, the switch needs to

authenticate the user by EAP relay (EAPoR authentication); if the switch connects to the

RADIUS server by PPP, the switch will use EAP local end authentication (CHAP

authentication). The switch should use different authentication methods according to

the connection between the switch and the authentication server.

 Example: Setting EAP local end authentication for the switch.

 Switch(config)#no dot1x eapor enable