Qtech QSW-8200-28T-POEAC- DC [10/25] Show boot files

User Manual

Chapter 1. Commands for Show 10

www.qtech.ru

1.9 show boot-files

 This command is not supported by the switch.

1.10 show debugging

 Command: show debugging {bgp | dvmrp | igmp | ipv6 | mld | nsm | ospf | other |

pim | rip | spanning-tree | vrrp}

 Function: Display the debug switch status.

 Usage Guide: If the user needs to check what debug switches have been enabled, show

debugging command can be executed.

 Command mode: Admin Mode

 Example: Check for currently enabled debug switch.

 Switch#show debugging ospf

 OSPF debugging status:

 OSPF all IFSM debugging is on

 OSPF packet Hello detail debugging is on

 OSPF packet Database Description detail debugging is on

 OSPF packet Link State Request detail debugging is on

 OSPF packet Link State Update detail debugging is on

 OSPF packet Link State Acknowledgment detail debugging is on

 OSPF all LSA debugging is on

 OSPF all NSM debugging is on

 OSPF all events debugging is on

 OSPF all route calculation debugging is on

 Switch#

 Relative command: debug

1.11 show fan

 This command is not supported by switch.

1.12 show flash

 Command: show flash

 Function: Show the size of the files which are reserved in the system flash memory.

 Command Mode: Admin Mode and Configuration Mode.

 Example: To list the files and their size in the flash.

 Switch#show flash

 boot.rom 329, 828 1900-01-01 00:00:00 --SH

 boot.conf 94 1900-01-01 00:00:00 --SH