Qtech QSW-8200-28F-AC-DC [10/11] Show sflow

User Manual

Chapter 3. Commands for sFlow 10

www.qtech.ru

 <output-rate> is the rate of egress group sampling, the valid range is

1000~16383500.

 Command Mode: Port Mode.

 Default: No default value.

 Usage Guide: The traffic sampling will not be performed if the sampling rate is not

configured on the port. And if the ingress group sampling rate is set to 10000, this

indicates there will be one group be sampled every 10000 ingress groups.

 Example: Configure the ingress sample rate on port e1/0/1 to 10000 and the egress

sample rate to 20000.

 Switch(Config-If-Ethernet1/0/1)#sflow rate input 10000

 Switch(Config-If-Ethernet1/0/1)#sflow rate output 20000

3.9 show sflow

 Command: show sflow

 Function: Display the sFlow configuration state.

 Parameter: None.

 Command Mode: All Modes.

 Usage Guide: This command is used to acknowledge the operation state of sFlow.

 Switch#show sflow

 Sflow version 1.2

 Agent address is 172.16.1.100

 Collector address have not configured

 Collector port is 6343

 Sampler priority is 2

 Sflow DataSource: type 2, index 194(Ethernet1/0/2)

 Collector address is 192.168.1.200

 Collector port is 6343

 Counter interval is 0

 Sample rate is input 0, output 0

 Sample packet max len is 1400

 Sample header max len is 50

 Sample version is 4

Displayed Information

Explanation

Sflow version 1.2

Indicates the sFlow version is 1.2

Agent address is 172.16.1.100

Address of the sFlow sample proxy is 172.16.1.100

Collector address have not

the sFlow global analyzer address is not configured