Qtech QSW-8200-28F-AC [54/77] Commands for boot configuration

User Manual

Chapter 1. Commands for Basic Switch Configuration 54

www.qtech.ru

 Command mode: Global Mode

 Example: Modify the retransmission to 10 times.

 Switch#config

 Switch(config)#tftp-server retransmission-number 10

1.5.11 tftp-server transmission-timeout

 Command: tftp-server transmission-timeout <seconds>

 Function: Set the transmission timeout value for TFTP server.

 Parameter: <seconds> is the timeout value, the valid range is 5 to 3600s.

 Default: The system default timeout setting is 600 seconds.

 Command mode: Global Mode

 Example: Modify the timeout value to 60 seconds.

 Switch#config

 Switch(config)#tftp-server transmission-timeout 60

1.6 Commands for Boot Configuration

1.6.1 baudrate

 Command: baudrate <value>

 Function: This command is used to configure the baud rate of the switch.

 Parameters: <value> is the baud rate, the baud rate the switch supported currently are

9600,14400,19200,38400,57600,115200.

 Default: 9600.

 Command Mode: Boot Mode.

 Usage Guide: This command is used to configure the appropriate baud rate when

transmitting the files under the xmodem mode. The baud rate of the switch must be

the same as the baud rate of the serial port software in PC.

 Example: Configure the baud rate of the switch as 115200 when transmitting the files

under the xmodem mode.

 [Boot]: baudrate 115200

1.6.2 boot img

 Command: boot img <img-file-url> {primary | backup}

 Function: Configure the first and second starting of img files of the switch.

 Parameters: primary means to configure the first starting of IMG file, backup means to

configure the second starting of IMG file, <img-file-url> is the full path of the booting

IMG file.

 Command mode: Boot mode.

 Default: There is only the first booting IMG file which is nos.img file in the FLASH, the

second booting IMG file is free.