SENA SR10 для двухсторонних раций [19/38] Fault reset

SENA SR10 для двухсторонних раций [19/38] Fault reset
English
19
1. To restore the SR10 to factory default settings, press and hold
the Pairing Button for 12 seconds until the LED shows solid
red.
2.Within 5 seconds,pressthe PairingButton againto conrm
reset. The SR10 will be restored to factory settings and
switchedoffautomaticallyaftertheblueLEDashesseveral
times.
3. If you don't press the Pairing Button within 5 seconds, the reset
attempt is canceled and the SR10 returns to standby mode.
6.7 Fault Reset
If the SR10 is not working properly or is in a faulty status for any
reason, you may reset by pushing the small reset button at the
top of the SR10 main unit. By using a paper clip or a pencil tip,
lightly press and hold the reset button for 1 second. The SR10 will
be switched off. Turn the SR10 back on to use it. However, this will
not restore the SR10 to factory default settings.
6.8 Firmware Upgrade
The SR10 supports rmware upgrade function. Please visit
Sena Bluetooth web site at www.sena.com to check the latest
software downloads.

Содержание

Похожие устройства

Скачать