FLIR Scout II Hunter 640(40) [7/13] Www tulon24 ru

431-0008-21-10 Rev. 100 March 2015 8

2 Getting Started

2–2 Using USB/Analog Video Adapter Cable—Scout II 320 only

To obtain analog video out, insert the adapter cable into the USB connector. The camera will detect

the adapter cable and provide the video stream. Use an RCA cable to connect to a monitor or a

video recorder.

When using the USB/Analog Video Adapter cable to record video or supply video to a remote

monitor, it may be useful to turn off the Auto Shutdown feature of the camera.

2–3 Scout II Series Power Management

Your Scout II Series camera is equipped with a power management system that provides up to five

hours of continuous operation. When left in the Off state the battery will hold a charge for up to two

months. To make the best use of the camera it is important to understand the basic power states of

the camera.

• When the camera is turned on from the Off state, it takes about five seconds to become

operational. During the Bootup process, the FLIR splash screen is shown and then the

software version is displayed briefly. Pressing the Power button will toggle the camera

between On and Off.

• The camera shuts down after about five minutes if no buttons are pushed. Auto

shutdown 30s, is shown in the display, and after counting down for 30 seconds the

camera will shutdown.

Camera

State

How do you know?

Off

The display is off and the Task Light comes on when the

Brightness button is pressed.

The display is on and the LED Task Light is disabled. If the

image appears blank, make sure the lens cover is removed.

USB/Video

Customer supplied

adapter cable

RCA cable

www.tulon24.ru