Nichiyu RBC10D [3/5] Travel speed suppression for higher lifts

Nichiyu RBC10D [3/5] Travel speed suppression for higher lifts
The dead weight of the load is displayed on the indicator panel.
■
Digital Load Indicator
■
Reel-type Safety Belt
An alarm can be set to sound automatically when an overload is
detected (optional).
The reel-type safety belt
extends the work range
without creating
unnecessary slack.
If sudden tension is
detected, the safety
feature locks to prevent
further extension of the
safety belt.
When the forklift truck is
temporarily stopped on a slope,
the operator can easily restart
because the forklift reverses at
the extremely slow speed of 1
km/h, even if the brake is
released with the accelerator
off.
Safety Cruise with Anti-roll back Function
Extensive Interlock Functions
●
Safety guard is not in place.
●
Top cover is closed.
●
Truck is being charged.
●
Forks are sitting on rack
(or chain is slack).
●
Travel and lift lock activated.
●
Charging lock activated.
●
Travel and lift lock activated.
●
Travel and lift lowering lock* activated.
*Except RB Series
1km/h
The enhanced rigidity of the mast and body greatly reduce mast
shaking compared to conventional models. This ensures stability
and greater peace of mind during operation.
■
Significantly Reinforced Mast
This feature temporarily
stops the pallet before it
lands even when the
operator holds down the
lowering button. This
prevents unintentional
pallet loss. (The pallet is
fully lowered when the
lowering button is
pressed a second time.)
■
Auto Pre-stop
The electric pallet lock automatically locks the pallet with a lock
bar when the pallet is raised more than 300 mm.
■
Auto Pallet Lock
Auto Pallet Lock releasedAuto Pallet Lock activated
Stop
(1) Picking (2)
Lift is lowered.
(3)
Pallet is fully lowered.
(4)
The operator moves on
to the next operation,
unaware the pallet is left
behind.
Electromagnetic braking followed by regenerative braking ensures
smooth, sure braking.
Smooth Assured Braking System
Auto Speed Control
Smooth braking
Regenerative braking
Electromagnetic braking actuates.
Smooth deceleration is activated at lifting heights of 0.5 m and
up. Furthermore, when a certain lifting height is exceeded,
traveling is stopped.
Travel speed suppression for higher lifts
The lift speed is smoothly reduced as the speed of the forklift
increases. Also, the traveling speed is smoothly reduced as the
steering angle becomes tighter.
Lift speed suppression and travel speed suppression on turning
Stopped
In case of emergency, the driver compartment can be controlled
from the ground. To lower the lift, simply operate the valve on the
main unit.
■
Emergency Lowering Device
To prevent wasteful power consumption,
power is automatically shut off when the
forklift is left idle for 15 minutes with the
key switch accidentally left ON. This
ensures peace of mind before a holiday
period.
Auto Power-Off
The neutral safety function prevents unintended operation even if
the key switch is accidentally turned ON when the accelerator/lift
button is activated.
Neutral Safety Feature
POWER OFF
15 minutes
You can set lift limit and temporary lift stop at any position (one stage
respectively as standard). The shockless function ensures minimal thrust
shock when lifting is paused.
Lift Limit & Temporary Lift Stop Functions
■
Lift Temporary Stop Function
■
Lift Limit Function
Note: Contact a Nichiyu Service Technician to set the lift stop position.
Temporary Stop
Stop
Small Diameter Horizontal Electric Power Steering
■Control Panel
Height Adjustable Control Panel
The turning angle of the drive wheel is
clearly indicated on the display panel.
Easy-to-see wheel indicator
ForSafer,Simpler,and
EasierOperation
Designforsafetyincreasesworkefficiency.
AssuredSafetyandEnhancedProtection
Innovativefunctionsthatcontributetoenhancedsafety
Electromagnetic
braking
actuates just
before the
truck stops.
Low-fatigue Accelerator
Grip with Integrated
Raising/Lowering Buttons
●Unintentional pallet loss occurs as follows.
3 4

Содержание

Скачать