Home
Главная
Stiga
подметальная машина
SWP 355
Инструкция по эксплуатации Страница: 12

Stiga SWP 355 Инструкция по эксплуатации онлайн [12/17] 502267

Stiga SWP 355 Инструкция по эксплуатации онлайн [12/17] 502267

64

SWP 355

EN

NOTE

Do not press the plate brooms too rmly on

the ground. A too high pressure does not

achieve a better cleaning result, but rather

leads to an increase in the pushing resistance

and the wear of the device.

Fig.10: Heightadjustmentoftheplate

brooms

• Set the required level:

• Push the lever (1) into the desired position

(Level 1-3) to the left or right.

» Lift the machine slightly by the handle. This

will make it easier to adjust the height.

7.2 Operation

• Operate the device via the telescopic bracket

with both hands.

• Push the device forward at normal walking

speed.

• Remove the sweeping container as needed,

see section “Empty sweeping container” in

Section of this operating manual.

7.3 Emptysweepingcontainer

Fig.11: Releasepositionofthesweeping

container

• Empty the sweeping container after each use.

• Empty the sweeping container at regular

intervals to achieve a proper sweeping result.

1. Bring the telescopic sliding bracket (1) into

the vertical position.

» In this position, the sweeping container is

released for removal from the device. This is

also indicated by the symbol “Lock unlocked”.

2. Pull the sweeping container upwards by the

handle (2).

3. Empty the sweeping container completely.

» Make sure that the enclosure sides are free

of dirt.

4. Place the empty sweeping container on

the device and bring the telescopic sliding

bracket back into the operating position.

» In the operating position of a telescopic

sliding bracket, the sweeping container is

locked.

Operation

1

2

3

1

1

2

Похожие устройства