Home
Главная
Indesit
Стиральная Машина
SISL 106S
Инструкция по эксплуатации Страница: 10

Indesit SISL 106S [10/24] Care and maintenance

Care and maintenance

Cutting off the water and electricity

supply

 Turn off the water tap after every wash. This will

limit wear on the hydraulic system in the machine

and help to prevent leaks.

 Unplug the appliance when cleaning it and during

all maintenance work.

Cleaning the machine

The outer parts and rubber components of the

appliance can be cleaned using a soft cloth soaked in

lukewarm soapy water. Do not use solvents or

abrasives.

Cleaning the detergent dispenser

drawer

 We recommend you check that there is no

detergent or water inside the detergent drawer

before removing it. If these substances are present,

proceed with care as they may leak out of the

drawer while it is being removed.

The detergent dispenser drawer in this machine is

cleaned automatically during the wash cycles.

However, residues may form very occasionally after

certain detergents have been used. To clean the

drawer, proceed as follows:

1. Open the door to

access the drawer.

2. Remove the drawer by

pulling upwards, holding it

by the central

compartment as

indicated in the figure. Do

not grip the drawer by

the grille as this may

damage it.

3. Unhook the drawer

cover to access the

compartment, as

indicated in the figure.

4. Clean the drawer

under running water.

5. Re-hook the cover

and replace the drawer,

pushing until it clicks into

place.

Caring for the door and drum of your

appliance

 Always leave the porthole door ajar in order to

prevent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump which does not require any maintenance.

Sometimes, small items (such as coins or buttons)

may fall into the pre-chamber which protects the

pump, situated in its bottom part.

 Make sure the wash cycle has finished and unplug

the appliance.

To access the pre-chamber:

1. remove the protective

casing on the lower part

of the washing machine,

turning it in an

anticlockwise direction

(see figure);

2. unscrew the lid by

rotating it anti-clockwise

(see figure): a little water

may trickle out. This is

perfectly normal;

3. clean the inside thoroughly;

4. screw the lid back on;

5. screw the protective cap back on by turning it in a

clockwise direction, making sure the arrow on the

inside part of the cap is facing upwards.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are

any cracks, it should be replaced immediately: during

the wash cycles, water pressure is very strong and a

cracked hose could easily split open.

 Never use second-hand hoses.

Содержание

Похожие устройства

Care and maintenance Cutting off the water and electricity supply Caring for the door and drum of your appliance Turn off the water tap after every wash This will limit wear on the hydraulic system in the machine and help to prevent leaks Always leave the porthole door ajar in order to prevent unpleasant odours from forming Cleaning the pump Unplug the appliance when cleaning it and during all maintenance work Cleaning the machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives The washing machine is fitted with a self cleaning pump which does not require any maintenance Sometimes small items such as coins or buttons may fall into the pre chamber which protects the pump situated in its bottom part Make sure the wash cycle has finished and unplug the appliance To access the pre chamber Cleaning the detergent dispenser drawer 1 remove the protective casing on the lower part of the washing machine turning it in an anticlockwise direction see figure We recommend you check that there is no detergent or water inside the detergent drawer before removing it If these substances are present proceed with care as they may leak out of the drawer while it is being removed The detergent dispenser drawer in this machine is cleaned automatically during the wash cycles However residues may form very occasionally after certain detergents have been used To clean the drawer proceed as follows 1 Open the door to access the drawer 2 Remove the drawer by pulling upwards holding it by the central compartment as indicated in the figure Do not grip the drawer by the grille as this may damage it 3 Unhook the drawer cover to access the compartment as indicated in the figure 4 Clean the drawer under running water 5 Re hook the cover and replace the drawer pushing until it clicks into place 10 2 unscrew the lid by rotating it anti clockwise see figure a little water may trickle out This is perfectly normal 3 clean the inside thoroughly 4 screw the lid back on 5 screw the protective cap back on by turning it in a clockwise direction making sure the arrow on the inside part of the cap is facing upwards Checking the water inlet hose Check the inlet hose at least once a year If there are any cracks it should be replaced immediately during the wash cycles water pressure is very strong and a cracked hose could easily split open Never use second hand hoses

Скачать