Home
Главная
Metabo
Перфоратор
KHA 18 LTX (600210800)
Инструкция по эксплуатации Страница: 10

Metabo KHA 18 LTX (600210800) Инструкция по эксплуатации онлайн [10/72] 503481

ENGLISHen

To reduce your exposure to these chemicals: work

in a well ventilated area, and work with approved

safety equipment, such as dust masks that are

specially designed to filter out microscopic

particles.

Observe the relevant guidelines for your material,

staff, application and place of application (e.g.

occupational health and safety regulations,

disposal).

Collect the generated particles at the source, avoid

deposits in the surrounding area.

Use suitable accessories for special work (see

chapter 9.), thus less particles enter the

environment in an uncontrolled manner.

Use a suitable extraction unit.

Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the

exhaust air stream at yourself or nearby persons

or on dust deposits.

- Use an extraction unit and/or air purifiers

- Ensure good ventilation of the workplace and

keep clean using a vacuum cleaner Sweeping or

blowing stirs up dust

- Vacuum or wash the protective clothing Do not

blow, beat or brush.

Transport of li-ion battery packs:

The shipping of li-ion battery pack is subject to laws

related to the carriage of hazardous goods (UN

3480 and UN 3481). Inform yourself of the currently

valid specifications when shipping li-ion battery

packs. If necessary, consult your freight forwarder.

Certified packaging is available from Metabo.

Only send the battery pack if the housing is intact

and no fluid is leaking. Remove the battery pack

from the machine for sending. Prevent the contacts

from short-circuiting (e.g. by protecting them with

adhesive tape).

See page 2.

1 Additional handle

2 Tool lock

3 SDS chuck

4 Depth stop

5 Switch button (for changing the operating

mode)

6 Lock

7 Carrying strap

8 Eyelet for securing the carrying strap

9 Rotation selector switch

10 Trigger

11 Handle

12 Capacity indicator button

13 Capacity and signal indicator

14 Battery pack

15 LED lights

16 Battery pack release button

*equipment-specific

6.1 Assembly of the additional handle

For safety reasons, always use the additional

handle supplied.

Open the clamping ring by turning the additional

handle (1) counter-clockwise. Push the additional

handle onto the collar of the machine. Insert the

depth stop (4). Securely tighten the additional

handle at the angle required for the application.

6.2 Battery pack

Charge the battery pack (14) before use.

If performance diminishes, recharge the battery

pack.

The ideal storage temperature is between 10°C and

30°C.

Li-Ion battery packs "Li-Power" have a capacity and

signal indicator (13):

- Press the button (12), the LEDs indicate the

charge level.

- If one LED is flashing, the battery pack is almost

flat and must be recharged.

6.3 Removing and inserting the battery pack

Removal: Press the battery pack release button

(16) and pull the battery pack (14) forwards .

To insert: Slide the battery pack (14) in until it

engages.

6.4 Carrying strap

If necessary, hang the hook on the Metabo carrying

strap (7) on the eyelet (8). Set the carrying strap (7)

to the desired length.

Carrying:

To prevent unintentional start-up, move the

rotation selector switch (9) to centre position

(transporting safety device).

Never carry with a tool

inserted.

The machine must only be carried with the

Metabo carrying strap (7) across chest and

back (illustration a, page 2). Hold the machine

steady.

The machine must NOT be carried with the carrying

strap (7) around your neck (illustration b, page 2).

7.1 The machine's multifunctional

monitoring system

If the machine switches off automatically, the

machine electronics have activated automatic

protection mode. A warning signal sounds

(continuous beeping). The beeping stops after a

maximum of 30 seconds or when the trigger (10) is

released.

In spite of this protective function, overloading

is still possible with certain applications and

can result in damage to the machine.

5. Overview

6. Commissioning

7. Use

Metabo KHA 18 LTX (600210800) Инструкция по эксплуатации онлайн [10/72] 503481

Похожие устройства