Era NEO 4 S MRe [7/24] Era option 02 pic 10

Era NEO 6 C-02 [7/24] Era option 02 pic 10
EN
PROFIT (
pic
. 3-5)
• remove the protective cover;
• hold the power wire through the cable hole 1 in the case;
• strip the insulation on 7-8 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
• install the protective cover;
Fans of PROFITseries have dierent diameters of inlet and outlet pipes for the
connection of diusers with the flange of the corresponding diameter from absorption
and air ducts from air side discharge.
Install a duct fan;
From absorption, accession of air ducts to the fan is possible through fittings of a
necessary form and diameter or a decorative grill with a flange.
Рис.9 ERA
Pic.11 EURO
Pic.10 ERA Option -02
Pic.12 EURO Option -02
Pic. 8. E Option -02
Pic. 7. Option MRe
Pic. 6. E/NEO
1
2
1
2
E/NEO (pic. 6-8)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
ERA (pic. 9)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in
the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
ERA Option -02 (pic. 10)
• remove the decorative front panel
• install S3 switch to the fan case
• connect the wires by inserting the tip pins 3
to the switch S3
• hold the power wire through the cable hole 1
in the case
• strip the insulation on 5-7 mm from the wire
end
• insert wires into terminal box X and press them
by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with
grooves in the case
• fix the panel with screw
EURO (pic. 11-12)
• remove the decorative front panel
• hold the power wire through the cable hole 1 in the case
• strip the insulation on 5-7 mm from the wire end
• insert wires into terminal box X and press them by tap screw
• fix the wires by means of cable clamp 2
• combine clamps of the decorative panel with grooves in the case
• fix the panel with screw
2
1
3
3
2
1
1 21 2
X
S3
1
3
3
2

Содержание

Скачать