AM.PM F8050000 [4/20] Пустая страница
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

AM.PM F8050000 [4/20] Пустая страница

AM.PM F8050000 [4/20] Пустая страница
4
4. Switch on water supply system. During
mixer closed position check leakproofness of
all connections. If required arrange additional
tightening and sealing of connections
(having closed water supply preliminary).
5. Connect shower kit.
Mixer operation.
There is a safety button on thermostat
handle (right) that prevents water
temperature increase above 38С. For water
temperature increase at the mixer outlet
push the button and keep turning thermostat
handle to increase water temperature.
Adjustment of water ow is carried out by
mixer left handle. To increase water ow turn
handle counterclockwise; to reduce water
ow – turn handle clockwise.
Temperature adjustment:
As depending on pressure and temperature
of water supply system actual temperature
value xed by safety button may deviate
from preset 38С, after mixer installation its
adjustment is required. For that:
1. remove protective cap (5),
2. unscrew tting bolt (4) remove handle
(3), decorative indicator ring (2) and xing
ring (1)
3. switch on water ow by means of ow
adjustment handle
4. by turning thermal cartridge stock (6) to
the required side (temperature increase/
decrease), nd position when water
temperature at the outlet comprises 38С
(use the thermometer (not included into the
delivery set)).
5. switch on water ow
6. make assembly (item.2) in reverse order.
maIntenance recOmmendatIOns:
Risk of breaking of mixer cartridge may be
signicantly reduced by means of installation
of lters 100-300 mk to the mixer pipes that
prevent penetration of foreign particles (rust,
sand, etc.) to the mixer.
To avoid lime spots at the mixer housing
the mixer is recommended to be regularly
cleaned. Mixer cleaning should be carried
out by soap solution with the following rinse
with water and removing moisture by dry
soft cloth.
The remainings of liquid soap, shower gel
may also cause damages of decorative
cover. In case of their penetration onto
the mixer housing it should be thoroughly
cleaned with clean water
To avoid damages of product surface it
is forbidden to use abrasive для ухода
solutions and pastes.
To avoid changes color of decorative cover
it is forbidden to use chemicals for cleaning
that contain aggressive chemical substances
of acids, alkali, ammonium chloride and
other components containing chlorine.
Periodical cleaning of ltering elements
located at the inlet nozzles of mixer is
recommended (at least once a year). For
this purpose:
- switch off cold and hot water supply system
- by means of the tool with soft cover plates
(to avoid damage of decorative cover of
mixer nuts) disconnect mixer housing from
eccentric connectors
- remove ltering elements, clean them and
install again.
- install mixer housing in accordance with
item 3 – 4 of Installation instructions.

Содержание

Похожие устройства

Скачать