Daikin EWADC19C-XS [9/96] Options
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Daikin EWADC19C-XS [9/96] Options

Daikin EWADС19C-SS [9/96] Options
9
OPTIONS
ELECTRICAL / CONTROL
Soft starter
-
Electronic starting device to reduce
-
up
Compressor thermal overload relays
-
Safety devices against compressor motor overloading. This device together with internal
motor protection (standard) guarantee the best safety system for compressor motor.
Under / Over voltage control
-
This device control the voltage value of power supply and stop the chiller if the value exceeds the
allowed operating limits.
Energy meter
-
Device installed inside the control box showing ampere and volt values
Capacitors for power factor correction
-
To increase the operating power factor of the unit at nominal operating conditions. The
capacitors are “dry” self-regenerating type with over pressure disconnecting safety device insulated with a no toxic dielectric
mix with
no PCB or PCT.
Current limit
-
To limit maximum absorbed current of the unit whenever is required
Speedtrol (fan speed control device
-
ON/OFF
-
up to
-
18°C)
-
Continuous fan speed modulation on the first fan of each circuit. It
allows the unit working with air temperature down to –18°C.
Evaporator flow switch
-
Supplied separately to be wired and installed on the evaporator water piping (by the customer).
Compressors circuit breakers
Fans speed regulation (+ fan silent mode)
-
To control the
fan speed revolution for smooth operating control of the unit. This
option improves the sound level of the unit during low ambient temperature operation.
Ground fault relay
-
To shut down the entire unit if a ground fault condition is detected.
Rapid restart
-
It allows the unit to start as fast as 30 seconds after power is restored (in case of power failure).
INSTALLATION
Rubber anti vibration mounts
-
Supplied separately, these are positioned under the base of the unit during installation. Id
eal to
reduce the vibrations when the unit is floor mounted.
Spring anti vibration mounts
-
Supplied separately, these are positioned under the base of the unit during installation. Ideal for
dampening vibrations for installation on roofs and metallic structures.
OTHER
Container Kit
Witness test
Acoustic test
Refrigerant recovery unit
-
This option allows to stock refrigerant charge of 1 circuit for maintenance operation. Liquid receiver
includes in/out shut-off valve and reliefe valve.
Transport kit

Содержание

Похожие устройства

Скачать