Daikin EWTP140MBYN [127/452] Technical specification

ESIE 05-07 Wiring Layout

Part 1 – System Outline 1–115

3.3 Technical Specification

Version of software.

Note: In a DICN system (Master-slave), all the pCO²-controllers must have the same software code,

bios and boot version!

This manual is based on the software version V4.3M6.

Other software versions can have different displays and functions.

Applicable parts This chapter gives an overview of the references and codes as well as the revision number, of the

pCO² controller, the pCO and the EEV driver.

Adjusting the

contrast of the

display

Built in controller (pCO²)

Press the "enter" key and hold, then press "on/off" key and hold.

Keep the two buttons pressed and use the "up" and "down" keys to adjust the contrast.

Remote terminal (pCO)

When you use a remote controller it is possible to adjust the contrast.

At the back of the upper left corner of the remote controller you will find a hole where you can adjust

the brightness of the remote controller with a small screw driver.

Note: The remote terminal is the same as the pCO controller.

Software version: X x.xM6 (date) X: “V“: Final software

“A” = Alfa software

“B” = Beta software

Software code: FLDKNMCHLA “FL” = software for pCO²

“DKN” = Daikin Europe NV

“M” = Multilanguage

“CHL” = Large Chiller applications

“A” = Setup code for pCO²

Boot version: V x.xx (date) x.xx: progressive number

Bios version: V x.xx (date) x.xx: progressive number

ESIE05-07.book Page 115 Wednesday, October 11, 2006 10:42 AM