AXIOMET AX-102 Расширенная инструкция онлайн [2/14] 527867

I.General

His is equipped with the LCD display of text height 18.9 mm, is a 3 ¾ digital multimeter which has

the merits of clear Reading, stable performance and high reliability. It could be used to measure DC

voltage, AC voltage, DC current, AC current, resistance , capacity, frequency/duty cycle, diode and

make on and off test. Meanwhile, it is available for unit symbol display, automatic/manual range

switching, automatic power off and alarm function. The complete machine takes an integrated

circuit which can directly drive LCD 8-bit microprocessor and double-integrating A/D switching and

a digital display drive offering high resolution and high precision. Due to its complete functions,

high measurement accuracy and convenient operation, the multimeter is the ideal tool in laboratory

and factory as well as for radio fans and family.

II.Open-package Inspection

Open the package box and take out the meter, check carefully if the following accessories are

absent or damaged. If there is any absence or damage, please contact the distributor immediately.

Digital Multimeter: 1PC

Instruction Manual: 1 copy

Test Leads: 1 pair

Temperature Probe (K-Thermocouple): 1 PC

III. Safety Considerations

The design of meter is in accordance with IEC1010 clause (the safety standard issued by

International Electrotechnical Commission). Prior to the operation of the instrument, please first

read the safety considerations.

1. When DC voltage above 30V, AC voltage above 25V, current above 10mA, AC power line with

inductive load or power line during electric fluctuation is measured, please beware of electric

shock.

2. Prior to measurement, check if the measurement function switch is at the correct position.

Check if the meter pen is contacted reliably, connected correctly, and grounded well and etc. in

order to avoid electric shock.

3. Only if the meter is used with the matched meter pen, can it meet the requirement of safety

standard. When the line of the meter pen is damaged, it is necessary to replace another one of the

same model or the same electrical specification.

4. Don’t use other unconfirmed or disapproved protector tube to replace the protector tube inside

the meter. Only the protector tube of the same model or same specifications can be replaced.