AXIOMET AX-102 Расширенная инструкция онлайн [3/14] 527867

Before the replacement, the test leads must leave the measuring point and ensure there is no any

signal at the input terminal.

5. Don’t use other unconfirmed or disapproved battery to replace the battery inside the meter.

Only the battery of the same model or same electrical specification can be replaced. Before the

replacement, the test leads must leave the measuring point and ensure there is no any signal at the

input terminal.

6. When the electrical measurement is made, never let your body gets in touch with the ground

directly, and don’t touch uncovered metal terminal, output port, lead clamp and etc. where earth

potential may exist. Dry clothes, rubber shoes, rubber cushion and other insulating material are

usually used to keep your body insulated against the ground.

7. Don’t store and use it in the high-temperature, high-humidity, inflammable and strong magnetic

field environment.

8. It may do damage to the meter and endanger the operator’s safety if the voltage value beyond

the permitted ultimate voltage value is measured. The ultimate voltage value permitted for

measurement is marked on the instrument panel, and never measure the value exceeding the

standard. Don’t input the ultimate value out of regulation in order to avoid electric shock and the

damage to the meter.

9. When the test leads is inserted into the current socket, don’t measure any voltage for fear that

the meter should be damaged and operator’s safety be endangered.

10. Don’t try calibrating or repairing the meter. When necessary, only the qualified professional

personnel who have had special training or gained approval can make it.

11. During measurement, the requirement of measurement function must be in accordance with

LCD display. Please be sure to disconnect the line of the test leads with the measured object first

and ensure there is no any input signal. It is forbidden to switch the function/range selection switch

during measurement.

12. When “ ” is show on LCD display, please replace battery immediately to ensure the

measurement precision.

13. It is not allowed to insert the test leads into the current terminal to measure voltage!

14. Please don’t change the circuits of the meter freely for fear that the meter be damaged and the

safety be endangered.

15. Descriptions of safety symbols: