PEAKTECH PKT-P3315 Инструкция по эксплуатации онлайн [32/59] 527969

1. Safety Precautions

This product complies with the requirements of the following

European Community Directives: 2004/108/EC (Electromagnetic

Compatibility) and 2006/95/EC (Low Voltage) as amended by

2004/22/CE (CE-Marking). Overvoltage category III 1000V;

overvoltage category IV 600V; pollution degree 2.

CAT I: For signal level, telecommunication, electronic with small

transient over voltage

CAT II: For local level, appliances, main wall outlets, portable

equipment

CAT III: Supplied from a cable under earth; fixed installed

switches, automatic cut-off or main plugs.

CAT IV: Units and installations, which are supplied over aerial line,

which are stand in a risk of persuade of a lightning, i.e.

main-switches on current input, overvoltage-diverter,

current use counter.

To ensure safe operation of the equipment and eliminate the

danger of serious injury due to short-circuits (arcing), the following

safety precautions must be observed.

Damages resulting from failure to observe these safety precautions

are exempt from any legal claims whatever:

* Do not use this instrument for high-energy industrial installation

measurement.

* Do not exceed the maximum permissible input ratings (danger

of serious injury and/or destruction of the equipment).

* The meter is designed to withstand the stated max voltages. If it

is not possible to exclude without that impulses, transients,

disturbance or for other reasons, these voltages are exceeded

a suitable prescale (10:1) must be used.

* Replace a defective fuse only with a fuse of the original rating.

Never short-circuit fuse or fuse holding.

-31-