PEAKTECH PKT-P3315 Инструкция по эксплуатации онлайн [43/59] 527969

(1) LCD-Display

(2) Function switch

(3) COM-terminal

(4) V//Hz/Diode-terminal

(5) µA/mA-terminal

(6) 10 A-terminal

(7) ON/OFF button

For switching the unit on or off

(8) DATA-HOLD-button

The Data-Hold-Function enables to "freeze" a measured value

for later reading in the LCD. For activating the Data-Hold-

Function, press the HOLD-button. „H“-Symbol appears in the

LCD. To leave the Hold-Function, press the Hold button again

or move the Function switch. If you are in the „MAX MIN“-

Function and you start the HOLD-mode, new peak-values will

not be reached. Press the HOLD-button again to enter the

„MAX MIN“-mode again.

(9) Max.-MIN – HOLD Function

For measuring the MIN or Max-value make the following steps:

* Press the „MIN MAX“ button to display the max.

measured value (MAX-Symbol appears in the LCD)

* Press „MAX MIN“ again to display the min. measured

value (MIN-Symbol appears in the LCD)

* Press „MAX MIN“ again to show the present measured

value (MAX MIN appears in the LCD).

* Press and hold the „MAX MIN“ button for 1 second to

leave the "MIN MAX"-mode.

(10) Relative measurements

Example:

If the stored Relative value is 20.00V and the present

measured value is 22.00V, the display shows a value of

2.00V.

If the value is the same as the stored Relative value, the

display shows 0.00 V.

* Press the „REL“ button to activate the REL-mode.

* Auto range selection will be deactivated and the present

range will be stored.

* Press „REL“ again to show the stored value.

-42-