AXIOMET AX-DG1015AF Расширенная инструкция онлайн [3/15] 527979

• Install the instrument in a place where the ambient temperature is in range of 10~70°C. Note that the instrument

operation may become unstable if it is operated in an ambient temperature exceeding the range of 0~40°C

2.3. Power Supply

AC Input voltage: 110V~120V/220~240V ±10%, 50/60Hz.

Connect the protective grounding conductor of the AC power cord to an earth ground to avoid electrical shock.

2.4. Fuse

• Fuse type: 110~120V: T2A /250V, or 220~240V: T1A/250V.

• Make sure the correct type of fuse is installed before power up.

• Replace the AC fuse with the same type and rating as the original fuse.

• Disconnect the power cord before fuse replacement.

• Make sure the cause of fuse blowout is fixed before fuse replacement.

2.5. Maintenance Inspection

• Inspect the instrument at regular intervals so that it maintains its initial performance for a long time.

• Check the input power cord for damage of the vinyl cover and overheating of the plug and cord stopper. Check the

terminal screws and binding posts for loosening.

• Remove dust from the inside of the casing and ventilation holes of the cover by using a compressed air of the exhaust

air of a vacuum cleaner.

2.6. Cleaning

• Before cleaning, disconnect the AC mains.