AXIOMET AX-DG1015AF [5/15] Quick starting

4. Quick Starting

4.1.

This chapter describes the front and rear panels of the arbitrary waveform DDS function generator. The brief introduction

of the function generator helps you get familiar with the fundamental operations and functions. The main contents in this

chapter are as following.

4.2. Preparation

4.2.1. Check the Function Generator and Accessories

Check the function generator and accessory parts and verify all items in the good shape. If the box is broken, please keep

the box until the function generator passes function test.

4.2.2. Connect the Function Generator to Power

Only under the conditions below, users can connect power cable and turn on the power switch. Voltage: AC220V

(1±10%), AC110V (1±10%) (Pay attention to the position of voltage selection switch), Frequency: 50Hz (1±5%), Watts:

<45VA, Temperature: 0~40°C, Humidity: <80%.

Plug the power cord into an 110V or 220V power outlet with ground connection and turn on the function generator. The

function generator starts to initialize - display the instrument name, load the default parameters, display menu of Channel

A frequency, start channel A and B output signal. After initialization, the function generator is in the

normal working mode.

WARNING: For protection from electrical shock, the three-hole power cord with protective earth ground has to be used.

4.3. Front Panel and Rear Panel

Front Panel