BEHA-AMPROBE BM078 Расширенная инструкция онлайн [15/24] 529183

Intelligent Auto-Power-Off (APO)

The APO mode turns the meter off automatically to extend battery life after idling 32

minutes of no specified activities, where applicable, below:

1) Rotary switch or push button operations

2) Significant measuring readings of above 8.5% of ranges

3) Non-over-range readings for Resistance, Continuity or Diode function

4) Non-zero readings for Hz function

In other words, the meter will intelligently reset the APO mode when it is under normal

measurements. To wake up the meter from APO, press the SELECT button

momentarily and release, or turn the rotary switch OFF and then back on. Always turn

the rotary switch to the OFF position when the meter is not in use.

Power-on Options

◎

Disabling APO and ABO

Press and hold the SELECT button while powering on the meter can disable both APO

and ABO features temporarily during the power on session. The LCD will display

“dAPO” to confirm selection before the SELECT button is released.

◎

Shortening APO idling time for inspection

Press and hold the HOLD button while powering on the meter can shorten the APO

idling time to 5 seconds temporarily during the power on session. It is designed mainly

for production inspection.

◎

Showing all LCD segments for inspection

Press and hold the REC button while powering on the meter can hold and show all

LCD segments before the button is released. It is designed mainly for production

inspection.

5) MAINTENANCE

WARNING

To avoid electrical shock, disconnect the meter from any circuit, remove the test leads

from the input jacks and turn OFF the meter before opening the case. Do not operate

with open case.