![Gigabyte H470M DS3H (rev. 1.0) [2/48] Copyright](/img/pdf.png)
Gigabyte H470M DS3H (rev. 1.0) [2/48] Copyright
![Gigabyte H470M DS3H (rev. 1.0) [2/48] Copyright](/views2/1667885/page2/bg2.png)
Copyright
© 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specications and features in this manual may be made by GIGABYTE
without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any
form or by any means without GIGABYTE's prior written permission.
In order to assist in the use of this product, carefully read the User's Manual.
For product-related information, check on our website at: https://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:
1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before
updating motherboard BIOS, drivers, or when looking for technical information.
Example:
Содержание
- H470m ds3h 1
- Rev 1001 12me h47ms3h 1001r 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 2 3
- Chapter 3 appendix 1 3
- H470m ds3h motherboard layout 3
- Table of contents 3
- Box contents 4
- H470m ds3h 4
- H470m ds3h motherboard 5 two sata cables 4
- H470m ds3h motherboard layout 4
- Motherboard driver disc 5 i o shield 4
- User s manual 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 9
- 4 installing the memory 9
- Dualchannelmemoryconfiguration 9
- Installing the cpu 9
- 5 installing an expansion card 10
- 6 back panel connectors 10
- D sub port 10
- Dvi d por 10
- Ps 2 keyboard mouse port 10
- Usb 2 1 port 10
- Displayport 11
- Hdmi port 11
- Line in rear speaker out blue 11
- Line out front speaker out green 11
- Mic in center subwoofer speaker out pink 11
- Rj 45 lan port 11
- Triple displayconfigurationsfortheonboardgraphics 11
- Usb 3 gen 1 port 11
- Usb 3 gen 1 port q flash plus port 11
- Usb type 11
- Audio jack configurations 12
- Playback device to change the default setting first 12
- Please visit gigabyte s website for details on configuring the audio software 12
- The integrated hd high definition audio provides jack retasking capability that allows the 12
- To configure 7 channel audio you need to open the audio software and select device 12
- User to change the function for each jack through the audio driver 12
- 7 internal connectors 13
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 14
- 4 cpu_fan sys_fan1 2 3 fan headers 14
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 14
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from 14
- Overheating overheating may result in damage to the cpu or the system may hang 14
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 14
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 14
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 14
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 14
- Before installing the devices be sure to turn off the devices and your computer unplug the power cord from the power outlet to prevent damage to the devices 15
- Connect your addressable led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 of the addressable led strip header incorrect connection may lead to the damage of the led strip 15
- Connect your rgb led strip to the header the power pin marked with a triangle on the plug of the led strip must be connected to pin 1 12v of this header incorrect connection may lead to the damage of the led strip 15
- D_led1 addressable led strip header 15
- For how to turn on off the lights of the led strip please visit the unique features webpage of gigabyte s website 15
- Led_c1 rgb led strip header 15
- No pin 15
- Pin no definition 15
- The header can be used to connect a standard 5050 addressable led strip with maximum power rating of 5a 5v and maximum number of 1000 leds 15
- The header can be used to connect a standard 5050 rgb led strip 12v g r b with maximum power rating of 2a 12v and maximum length of 2m 15
- Chipset supports raid 0 raid 1 raid 5 and raid 10 refer to chapter 3 configuring a raid set for instructions on configuring a raid array 16
- For how to use q flash plus please visit the unique features webpage of gigabyte s website 16
- Q flash plus allows you to update the bios when your system is off s5 shutdown state save the latest bios on a usb thumb drive and plug it into the dedicated port and then you can now flash the bios automatically by simply pressing the q flash plus button the qfled will flash when the bios matching and flashing activities start and will stop flashing when the main bios flashing is complete 16
- Qflash_plus q flash plus button 16
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 16
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 16
- To enable hot plugging for the sata ports refer to chapter 2 bios setup settings io ports sata and rst configuration for more information 16
- Follow the steps below to correctly install an m ssd in the m connector step 1 use a screw driver to unfasten the screw and standoff from the motherboard locate the proper mounting hole for the m ssd to be installed and then screw the standoff first step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it with the screw 17
- Installationnoticesforthem andsataconnectors 17
- M2q m2p m socket 3 connectors 17
- Select the proper hole for the m ssd to be installed and refasten the screw and standoff 17
- The availability of the sata connectors may be affected by the type of device installed in the m sockets the m2p connector shares bandwidth with the sata3 0 1 connector refer to the following table for details 17
- The m connectors support m sata ssds or m pcie ssds and support raid configuration please note that an m pcie ssd cannot be used to create a raid set either with an m sata ssd or a sata hard drive to create a raid array with an m pcie ssd you must set up the configuration in uefi bios mode refer to chapter 3 configuring a raid set for instructions on configuring a raid array 17
- Ci chassis intrusion header connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 18
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 18
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 18
- F_audio front panel audio header 18
- F_panel front panel header 18
- Gnd 7 faudio_jd 18
- Hd hard drive activity led connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 18
- Line2_r 10 sense 18
- Mic2_l 6 sense 18
- Mic2_r 8 no pin 18
- Nc 9 line2_l 18
- Nc no connection 18
- Pin no definition pin no definition 18
- Pled pwr_led power led 18
- Pw power switch connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup settings platform power for more information 18
- Res reset switch connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 18
- S3 s4 s5 off 18
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 18
- Speak speaker connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 18
- System status led 18
- The front panel audio header supports high definition audio hd you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 18
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 18
- Com serial port header 19
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 19
- F_u32 usb 3 gen 1 header 19
- F_usb1 f_usb2 usb 2 1 headers 19
- From the power outlet to prevent damage to the usb bracket 19
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 19
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 19
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 19
- Add in card 20
- Add in card connectors 20
- Afd 11 pd4 20 gnd 20
- Clk 12 rst 20
- Data input 11 nc 20
- Data output 7 chip select 20
- Err 13 pd5 22 gnd 20
- Init 15 pd6 24 no pin 20
- Lpt parallel port header 20
- Nc 10 nc 20
- No pin 9 irq 20
- Pd0 12 gnd 21 busy 20
- Pd1 14 gnd 23 pe 20
- Pd2 16 gnd 25 slct 20
- Pd3 18 gnd 20
- Pin no definition pin no definition 20
- Pin no definition pin no definition pin no definition 20
- Power 3 v 8 gnd 20
- Slin 17 pd7 26 gnd 20
- Spi_tpm trusted platform module header 20
- Stb 10 gnd 19 ack 20
- Supports a thunderbol 20
- Thb_c1 thb_c2 thunderbol 20
- The connectors are used to connect to a gigabyte thunderbol 20
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 20
- You may connect an spi tpm trusted platform module to this header 20
- Bat battery 21
- Clr_cmos clear cmos jumper 21
- 1 startup screen 22
- Chapter 2 bios setup 22
- 2 the main menu 23
- Advanced mode function keys 23
- 3 favorites f11 24
- 4 tweaker 25
- Advanced cpu settings 25
- Avx offse 25
- Cpu clock ratio 25
- Cpu over temperature protectio 25
- Fclk frequency for early power on 25
- Hyper threading technology 25
- Igp rati 25
- No of cpu cores enabled 25
- Ring ratio 25
- Cpu eist functio 26
- Cpu enhanced halt c1e 26
- Cpu flex ratio override 26
- Cpu flex ratio settings 26
- Cpu thermal monito 26
- D active turbo ratios 26
- D c states control 26
- Energyefficientturb 26
- Intel r speed shift technology inte 26
- Intel r turbo boost max technology 3 26
- Intel r turbo boost technology 26
- Race to halt rth 26
- Ring to core offset down bin 26
- Speed shift technology 26
- Turbo ratio 1 core active 10 core active 26
- Voltage optimization 26
- C10 state suppor 27
- C3 state suppor 27
- C6 c7 state support 27
- C8 state support 27
- Core current limit amps 27
- D turbo per core limit contro 27
- D turbo power limits 27
- Dram power limit dram power limit time 27
- Package c state limi 27
- Package power limit tdp watts package power limit time 27
- Advanced memory settings 28
- Channel interleaving 28
- Extremememoryprofile x m p 28
- Memory boot mode 28
- Memory channel detection message 28
- Memory enhancement settings 28
- Memory multiplier tweaker 28
- Memory odd ratio 100 133 or 200 266 28
- Memory ref clock 28
- Rank interleaving 28
- Realtime memory timing 28
- Spd info 28
- System memory multiplier 28
- 5 settings 30
- Dmi aspm 30
- Pch aspm 30
- Peg aspm 30
- Platform power 30
- Platform power management 30
- Power on by keyboard 30
- Power on by mouse 30
- Power on password 30
- Ac back 31
- Aperture size 31
- Dvmt pre allocated 31
- Dvmt total gfx mem 31
- Initial display output 31
- Internal graphics 31
- Io ports 31
- Power loading 31
- Rc6 render standby 31
- Resume by alarm 31
- Soft off by pwr bttn 31
- Aggressive lpm support 33
- Configuredasesata 33
- Ez raid 33
- Hot plug 33
- Intel r ethernet connection 33
- Ipv6 http support 33
- Ipv6 pxe support 33
- Leds in system power on state 33
- Media detect count 33
- Miscellaneous 33
- Nvmeconfiguration 33
- Port 0 1 2 3 4 5 33
- Pxe boot wait time 33
- Sata controller s 33
- Sata mode selection 33
- Sataandrstconfiguration 33
- 3dmark01 enhancement 34
- Case open 34
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 34
- Fan control use temperature input 34
- Fan speed control 34
- Intel platform trust technology ptt 34
- Leds in sleep hibernation and soft off states 34
- Max link speed 34
- Monitor 34
- Pc health status 34
- Reset case open status 34
- Smart fan 5 34
- Software guard extensions sgx 34
- Trusted computing 34
- Fan control mode 35
- Fan fail warning 35
- Fan speed 35
- Fan stop 35
- Flow rate 35
- Temperature 35
- Temperature interval 35
- Temperature warning control 35
- 6 system info 36
- Access level 36
- Plug in devices info 36
- Q flash 36
- System date 36
- System language 36
- System time 36
- 7 boot 37
- Boot option priorities 37
- Bootup numlock state 37
- Fast boot 37
- Full screen logo show 37
- Sata support 37
- Security option 37
- Vga support 37
- Csm support 38
- Lan pxe boot option rom 38
- Mouse speed 38
- Network stack driver support 38
- Next boot after ac power loss 38
- Other pci devices 38
- Ps2 devices support 38
- Storage boot option control 38
- Usb support 38
- Windows 10 features 38
- Administrator password 39
- Preferred operating mode 39
- Secure boot 39
- User password 39
- 8 save exit 40
- Boot override 40
- Exit without saving 40
- Load optimized defaults 40
- Loadprofiles 40
- Save exit setup 40
- Saveprofiles 40
- 1 configuring a raid set 41
- 1 configuringaraidset 41
- A installing sata hard drive s in your computer 41
- B configuringsatacontrollermodeinbiossetup 41
- Beforeyoubegin pleasepreparethefollowingitems 41
- C 1 using ez raid 41
- Chapter 3 appendix 41
- Configuringtheonboardsatacontroller 41
- Raid levels 41
- C 2 uefiraidconfiguration 42
- C 3 configuringlegacyraidrom 42
- 2 installing an inte 43
- 2 installing an intel optane memory 43
- Installation guidelines a 1 installationinahcimode 43
- Installing the operating system 43
- Installing the raid driver and operating system 43
- Memory 43
- System requirements 43
- A 2 installationinintelrstpremiumwithinteloptanesystemaccelerationmode 44
- 3 drivers installation 45
- Regulatory notices 46
- United states of america federal communications commission statement 46
- Contact us 48
- Gigabyte esupport 48
- To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 48
Похожие устройства
- Gigabyte H470 HD3 (rev. 1.0) Инструкция
- Gigabyte B460M DS3H AC (rev. 1.x) Инструкция
- Gigabyte B460M DS3H (rev. 1.0) Инструкция
- Gigabyte B460M D3H (rev. 1.0) Инструкция
- Gigabyte B460M D2V (rev. 1.0) Инструкция
- Gigabyte B460 HD3 (rev. 1.0) Инструкция
- Gigabyte Z490M (rev. 1.0) Инструкция
- Gigabyte Z490 VISION G Инструкция
- Gigabyte Z490 VISION D Инструкция
- Gigabyte Z490 UD AC (rev. 1.0) Инструкция
- Gigabyte Z490 UD (rev. 1.0) Инструкция
- Gigabyte Z370 HD3-OP (rev. 1.0) Инструкция
- Gigabyte Z370 HD3 (rev. 1.0) Инструкция
- Gigabyte Z390 UD (rev. 1.1) Инструкция
- Gigabyte Z390 UD (rev. 1.0) Инструкция
- Gigabyte Z390 M (rev. 1.0) Инструкция
- Gigabyte Z390 DESIGNARE (rev. 1.0) Инструкция
- Gigabyte Z390 D Инструкция
- Gigabyte H410M S2H Инструкция
- Gigabyte H410M S2 Инструкция