Hoover FREEJET FJ180B2 [4/50] Accessories

4

USING YOUR CLEANER

Main cleaner

1. Turn the cleaner on by pressing the On/Off button. [1B]

2. Set the On/Off Turbo switch to the desired cleaning mode. [1C]

CARPET: Switch Turbo Nozzle ON (LED will be ON.)

HARD FLOOR: Switch Turbo Nozzle OFF (LED will be OFF.)

Handheld Cleaner

1. Press the Push and Go button and lift the handheld unit from the cleaner main body. [6]

Hold the unit over a bin and pull the bin empty trigger [2O] to instantly empty the dust container. [7]

Cleaning the Filters

1. Release the handheld unit from the main body of the cleaner.

2. Press the lter access button [2P] and remove the handle section from the dust container. [8]

3. Use the lter handle to remove the lter and lter screen from the dust container. [9]

4. Wash the lter and screen in hand warm water. Once thoroughly dry return to the dust container.

5. Reassemble the handheld unit and return to the cleaner main body.

Note: Do not use hot water or detergents when cleaning the lters. In the unlikely event of the lters becoming damaged,

t a genuine Hoover replacement. Do not try and use the product without a lter tted.

Changing the Agitator

If the cleaner is to be disposed of the batteries should be removed. Used batteries should be taken to a recycling station

and not disposed with household waste.

IMPORTANT: Always fully discharge the batteries before removal.

1. Run the unit until the batteries run at.

2. Release the handheld unit from the main body of the cleaner.

3. Press the lter access button and remove the handle section from the dust container.

4. Remove 6 screws and open the unit. [12]

5. Remove the motor/battery housing and disconnect the cables.

6. Remove the batteries from the housing.

Note: Should you experience any difculties in dismantling the unit or for more detailed information about treatment,