Gigabyte GV-R487-1GH-B [4/39] Hardware installation

- 4 -AMD Series Graphics Accelerator

2.2. Hardware Installation

Step 3.

Plug the display cable into your card; then turn on the computer and monitor. To connect a ﬂ at panel display

to your graphics card, use the DVI-I connector. To connect an HDMI monitor to your graphics card, use the

HDMI connector. To connect a DisplayPort monitor to your graphics card, use the DisplayPort connector.

Step 1.

Locate the PCI Express x16 slot. If necessary, remove the metal

cover from this slot; then align your graphics card with the PCI

Express x16 slot, and press it in firmly until the card is fully

seated.

Step 2.

Replace the screw to fasten the card in place, and replace the

computer cover.

Make sure that the gold edge connector of the graphics card is

securely inserted.

After installation, remember to connect the power cable to your graphics card, or the system

will not boot. Do not touch the card when it’s operating to prevent system instability.

You are now ready to proceed with the installation of the graphics card driver. Please refer to next chapter for

detailed instructions.

To Flat Panel Display To Flat Panel Display To HDMI Monitor

To D-sub Monitor

To Mini HDMI Monitor

To Mini DisplayPort Monitor