KRAFT Technology TCH-HV3710X [31/36] Cleaning and care

ВСТРАИВАЕМАЯ ГАЗОВАЯ ВАРОЧНАЯ ПАНЕЛЬ

GAS BUILT-IN HOB

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE

During cooking, when using fats and oils, be very careful because if they overheat they

could catch fire.

• As soon as a liquid starts to boil, turn the flame down to a level sufficient to maintain boiling.

• During cooking, when using fats and oils, be very careful because if they overheat they

could catch fire.

• Frozen dishes should be thawed before cooking.

• Combustible and flammable materials must be at least 1 meter away from the appliance.

Attention! Fire risk. Do not leave objects on the surface of the hob. Never attempt to put

out a fire/flames with water. Switch off the appliance and cover the flame with a lid or a

blanket made of fire-retardant material for example.

IMPORTANT! After use switch off the appliance.

WARNING: Before it is cleaned or serviced, the appliance must be disconnected from

the electric power source and allowed to cool. Cleaning of the appliance should be carried

out on a regular basis.

To keep the enameled part shiny for as long as possible, the appliance must be cleaned each

time after using it.

Remove the grease residue with a sponge or damp cloth and warm soapy water after the

appliance has cooled down completely. Do not use abrasive wipes or sponges that may

scratch the enamel.

Attention! Never use abrasive tools. Do not clean with a jet of steam.

• Often clean the burner flame spreader with boiling

water and detergent to remove any grease that may

block the flame exit.

• Use slightly damp sponges and wipes to clean the hob.

• Do not spray water on the oven or immerse the

appliance in water.

• The grids on the hob can be cleaned in the dishwasher.

• For persistent stains use normal non-abrasive

detergents, specific products commonly available on the market.

• Do not use metal brushes and sponges with abrasive surfaces to avoid damage and

corrosion. Do not use solvents, toxic cleaning liquids.

• Drying with a microfiber or soft cloth is preferred.

Periodically, or if the knobs become difficult to turn, contact a qualified engineer to lubricate

CLEANING AND CARE