KRAFT Technology TCH-HV6172BGG [27/32] Maintenance

ВСТРАИВАЕМАЯ ГАЗОВАЯ ВАРОЧНАЯ ПАНЕЛЬ

GAS BUILT-IN HOB

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ • USER GUIDE

The appliances are provided with a three-pole feeding cable and work with alternate current

and voltage indicated on the “rating plate of the product“ report at the end of the instruction

manual and on the product. The grounding conductor of the cable is marked with the colors

yellow/green.

Connect the feeding cable to a plug suitable for the load indicated on the rating plate of the

product.

Before connecting to the mains, make sure that:

• The electrical counter, the safety valve, the feeding line and

the socket are adequate to withstand the maximum load

required (see rating plate).

• The supply system is regularly grounded, according to the

regulations in force.

• The socket or the unipolar switch can easily be reached after

the installation.

• After connecting to the mains, make sure that the supply cable

does not come into contact with the heated parts.

• Never use reductions, shunts, adaptors that can cause

overheating or burning.

eLeCtRICAL ConneCtIon

WARNING: Do not use the same socket-outlet with other big power appliance.

The manufacturer is not liable for any direct or indirect damage caused by faulty installation

or connection. It is therefore necessary that qualified personnel complying with the local and

general regulations in force carry out all installation and connection operations.

ATTENTION! BEFORE SERVICING THE PRODUCT, TURN OFF ELECTRICAL POWER

WARNING: The appliance is very hot and becomes hot during operation! Do not to

touch the heating elements!

For lower gas consumption and a better yield, use saucepans with diameter suitable for the

burners, avoiding the flame coming up round the side of the saucepan (see the table below).

Use only flat-bottomed pans.

MAIntenAnCe