ASRock P55 Deluxe3 — установка и подключение аудио на материнской плате [27/226]

Превью страниц Страница 27 / 226

2727

ASRock P55 Deluxe3 Motherboard

EnglishEnglish

English

Front Panel Audio Header This is an interface for front

(9-pin HD_AUDIO1) panel audio cable that allows

(see p.2 No. 38) convenient connection and

control of audio devices.

1. High Definition Audio supports Jack Sensing, but the panel wire on

the chassis must support HDA to function correctly. Please follow the

instruction in our manual and chassis manual to install your system.

2. If you use AC’97 audio panel, please install it to the front panel audio

header as below:

A. Connect Mic_IN (MIC) to MIC2_L.

B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C. Connect Ground (GND) to Ground (GND).

D. MIC_RET and OUT_RET are for HD audio panel only. You don’t

need to connect them for AC’97 audio panel.

E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select

Chipset Configuration. Set the Front Panel Control option from

[Auto] to [Enabled].

Internal Audio Connectors This connector allows you

(4-pin CD1) to receive stereo audio input

(CD1: see p.2 No. 39) from sound sources such as

a CD-ROM, DVD-ROM, TV

tuner card, or MPEG card.

CD1

Infrared Module Header This header supports an optional

(5-pin IR1) wireless transmitting and

(see p.2 No. 30) receiving infrared module.

System Panel Header This header accommodates

(9-pin PANEL1) several system front panel

(see p.2 No. 23) functions.

Chassis Intrusion Header This motherboard supports

(2-pin CI1) CASE OPEN detection feature

(see p.2 No. 24) that detects if the chassis cover

has been removed. This feature

requires a chassis with chassis

intrusion detection design.