Philips PT923 [21/278] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Philips PT923 [21/278] English

Philips PT923 [21/278] English
Problem Possible cause Solution
You have not inserted the shaving
heads properly.
Make sure that the projections of the
shaving heads t exactly into the recesses
(see section ‘Cleaning and maintenance’).
The shaver does not
work when I press
the on/off button.
The rechargeable battery is empty.
Recharge the battery (see chapter ‘Charging’)
or connect the shaver to the mains.
The temperature of the shaver is too
high. In this case, the shaver does not
work.
As soon as the temperature of the shaver
has dropped sufciently, you can switch on
the shaver again.
The shaver is not
entirely clean after
I clean it in the
Jet Clean System
(PT927CC/
PT923CC only).
The cleaning uid in the cleaning
chamber is soiled.
Empty and rinse the cleaning chamber
(see chapter ‘Cleaning and maintenance’).
The cleaning uid level is too low. If the
uid volume in the cleaning chamber
drops below the minimum level during
the cleaning program, the program
aborts.The cleaning symbol and the ‘uid
low’ symbol ash at intervals and the
holder returns to its starting position.
Rell the cleaning chamber with cleaning
uid up to the MAX level (see chapter
‘Cleaning and maintenance’).
You have used another cleaning uid
than the original Philips cleaning uid.
Only use Jet Clean solution HQ200.
You have not closed the locking lever
of the Jet Clean System properly, or
you have not placed the shaver in the
Jet Clean Shaver properly. In these
cases the Jet Clean System starts to
operate, but the cleaning program is
not performed properly.
Place the shaver without protection cap in
the Jet Clean System properly. Close the
locking lever properly.
The Jet Clean
System (PT927CC/
PT923CC
only) does not
work when I press
the on/off button.
The Jet Clean System is not
connected to the mains.
Put the small plug in the Jet Clean System
and put the adapter in the wall socket.
Water leaks from
the shaver after
cleaning.
This is normal and not dangerous. During rinsing some water may collect
between the power unit and the housing.
After rinsing this water ows out through
the socket. The power unit is completely
watertight so water cannot reach the
electronic parts of the shaver. Your shaver
continues to be absolutely safe.
English 21

Содержание

Похожие устройства

Скачать