ASRock ROMED6U-2L2T [2/2] Romed6u 2l2t
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

ASRock ROMED6U-2L2T [2/2] Romed6u 2l2t

ASRock ROMED6U-2L2T [2/2] Romed6u 2l2t
ROMED6U-2L2T
Quick Installation Guide
www.asrockrack.com
1G LAN Port (LAN3, LAN4) LED Indications
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection or
no link
Blinking Green Data Activity Yel low 100Mbps connection
On Link Green 1Gbps connection
10G LAN Port (LAN1, LAN2) LED Indications
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 100Mbps connection or
no link
Blinking Yellow Data Activity Yel low 1Gbps connection
On Link Green 10Gbps connection
8 LAN Port LED Indications
IPMI LAN Port
ACT/LINK LED
SPEED LED
LAN Port
LAN Port
5
Install the Processor and Heatsink
We recommend using the CPU Installation tool to avoid CPU pin-bent problem.
3
4
7
8
Locate the three torx screws on the CPU socket and
unscrew them according to the order A→B→C. Open
the rst retention cover.
Open the second bracket. Take out the internal
plastic cover.
Install CPU along with the carrier frame, do not
separate them. Please make sure the carrier frame
with CPU is closely attached to the rail frame while
inserting it.
Please make sure that the carrier
frame with CPU is closely attached to
the rail frame while inser ting it.
5
6
Install the carrier frame with CPU. Don’t separate them.
Carrier Frame with CPU
Rail Fra me
Close the bracket that holds the CPU. Close the
retention cover. Fasten the torx screw according to the
order A→B→C.
1
2
M.2_SSD (NGFF) Module Installation
9
1
2
3
Prepare a M.2_SSD (NGFF) module and the screw.
Gently insert the M.2 (NGFF) SSD module into the
M.2 slot. Please be aware that the M.2 (NGFF) SSD
module only ts in one orientation.
Tighten the screw with a screwdriver to secure the
module into place. Please do not overtighten the
screw as this might damage the module.
20
o
NUT1NUT2
7 Install the Memory
1
2
3
Unlock a DIMM slot by pressing
the module clips outward.
Insert the memory module.
Lock the clips.
System Panel Auxiliary Panel
10 Panel Headers
GND
RESET#
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
6
Install the PCIE Card
1
Remove the bracket facing the slot that
you intend to use. Keep the screw for
later use.
2
Align the card connector with t he
slot and press firmly until the card is
completely seated on the slot.
Fasten the card to the chassis with the
screw.
3
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10M bps connection or no
link
Blinking Yellow Data Activity Yel low 100M bps connection
On Link Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
SPEED LED
ACT/LINK LED
GND
SMB_CLK
SMB_Alert
CASEOPE N
1
SMB_DATA
+3VSB
LAN1_LINK
LED_PWR
LAN2_LINK
LED_PWR
+5VSB
GND
GND
LOCATORLED1+
LOCATORLED1-
LOCATORBTN#
LOCATORLED2+
LOCATORLED2-
A
B
C
D
A1 C1 D1 E1 G1 H1
1 DIMM
#
2 DIMMS
# #
4 DIMMS
# # # #
6 DIMMS
# # # # # #

Содержание

Похожие устройства

Скачать