Teka GF-T STAINLESS [5/8] If something doesn t work

Before calling the repair service, make the

following checks:

If Something Doesn’t Work

• Remove the filter to access the light bulbs.

• Make sure that the hood has previously

been disconnected from the mains supply

and that the bulbs to be replaced are not

hot.

• The maximum bulb rating is 40 W.

Changing light bulbs

Fault Possible Cause Solution

Hood does not work

Mains cable not connected Connect mains cable

Power not reaching plug Check/repair mains supply

Hood not extracting

sufficiently or vibrating

Filter saturated with grease Clean or replace filter

Obstruction in venting duct Remove obstruction

Inadequate venting duct Contact installer and follow

the instructions in this manual

Lights do not work

Bulbs blown Replace bulbs

Bulbs loose Tighten up bulbs