Home
Главная
Planet
Медиаконвертеры
GT-906A15
Инструкция по эксплуатации Страница: 1

Planet GT-906A15 Инструкция по эксплуатации онлайн

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Content

Thanks you for purchasing PLANET 10/100/1000Base-T to

1000Base-SX / LX Industrial Managed Media Converter, IGT-

90x. Terms of “Industrial Managed Media Converter” in

following section of this Quick installation guide means the

IGT-90x.

The PLANET Industrial Managed Media Converter comes

with one of the following models.

● IGT-902: 10/100/1000Base-T to 1000Base-SX Industrial

Managed Media Converter (SC, MM)

● IGT-902S: 10/100/1000Base-T to 1000Base-LX Indus-

trial Managed Media Converter (SC, SM)

● IGT-905A: 10/100/1000Base-T to mini-GBIC Industrial

Managed Media Converter (LC, MM/SM)

Upon open the box of the Industrial Managed Media

Converter and carefully unpack it. The box should contain

the following items:

u The Industrial Managed Media Converter x 1

u This Quick Installation Guide x 1

u User’s Manual CD x 1

u Wall Mount Kit x 1

u DIN Rail Kit x 1

If any item is found missing or damaged, please contact

your local reseller for replacement.

3. Wiring the Power Inputs

The 6-contact terminal block connector on the top panel

of Industrial Managed Media Converter is used for two DC

redundant powers input. Please follow the steps below to

insert the power wire.

1. Insert positive / negative DC power wires into the

contacts 1 and 2 for POWER 1, or 5 and 6 for POWER 2.

Figure 1shows PWR1 and PWR2 of the Industrial Managed

Media Converter.

V1- V1+ V2- V2+

Figure 1 PWR1 & PWR2 of Industrial Managed Media Converter.

After entering the passwod (default user name and

password is “admin”) in login screen (Figure 1 appears).

The Web main screen appears as Figure 4.

Figure 4. Web Main Screen of IGT-90x

Now, you can use the Web management interface

to continue the Industrial Managed Media Converter

management, please refer to the user manual for more.

Note

For security reason, please change and

memorize the new password after this first

setup.

4. Start Web Management

The PLANET Industrial Managed Media Converter provides

a built-in browser interface. You can manage the Industrial

Managed Media Converter remotely by having a remote

host with Web browser, such as Microsoft Internet Explorer,

Netscape Navigator or Mozilla Firefox.

PC / Workstation

with

IE or Netscape

Browser

PC / Workstation

with

IE or Netscape

Browser

IGT-902 / IGT-902S

IGT-905A

RJ-45 UTP Cable

2. Requirements

The Industrial Managed Media Converter provide remote

Web interface for manage; the following equipments are

necessary for further management.

Network cables: Use standard network (UTP) cables with

RJ45 connectors

Subscriber PC installed with Ethernet NIC (Network Card)

The operate system of subscriber PC that running Windows

98/ME, NT4.0, 2000/XP, MAC OS9 or later, Linux, UNIX or

other platform compatible with TCP/IP protocols.

2. Tighten the wire-clamp screws for preventing the wires

from loosing. Figure 2 shows PWR1 and PWR2 pin of the

terminal block.

1 2 3 4 5 6

Power 1 Fault Power 2

- + - +

Figure 2 PWR1 & PWR2 pin of terminal block.

Note

The wire gauge for the terminal block should be

in the range between 12 ~ 24 AWG.

The following shows how to startup the Web Management

of the Industrial Managed Media Converter, please note

the Industrial Managed Media Converter is congured

through an Ethernet connection, make sure the manager

PC must be set on the same IP subnet address, for

example, the default IP address of the Industrial Managed

Media Converter is 192.168.0.100 (the factory-default IP

address), then the manager PC should be set at 192.168.0.x

(where x is a number between 1 and 254, except 100), and

the default subnet mask is 255.255.255.0.

Use Internet Explorer 5.0 or above Web browser, enter

default IP address http://192.168.0.100

To access the Web interface then the Web login screen

appears in Figure 3.

Figure 3. Web Login Screen of IGT-90x

5. While IP Address be changed or

forgotten admin password –

To reset the IP address to the default IP Address

“192.168.0.100” and the password to factory default

mode (default user name and password is admin). Press

the hardware reset button at the front panel about 10

seconds. After the device is rebooted, you can login the

management Web interface within the same subnet of

192.168.0.xx and default use name / password.

Note

The IGT-902 Reset button location is the same

with IGT-902S and IGT-905A.

Hardware Reset

Button

Figure 5. Reset button of IGT-90x

Planet GT-906A15 Инструкция по эксплуатации онлайн

Содержание

Похожие устройства