Chieftec MRT-6320P [14/18] Hot swap procedures

1.9 HOT SWAP PROCEDURES

Please refer to the following when either power module or the fan found

defective.

A) Locate and turn on the defective power module by examining the individual

LED (if LED without light, it indicates the power module is defective).

***WARNING:

Please perform the above step carefully otherwise it may cause shut down the

whole system.

B) Turn off the individual on/off switch of the defective power module.

***WARNING:

Please do not remove the defective power module until you have worn gloves to

keep from be burned. This is due to the cover of the power module has been

used as heat sink for cooling, usually the temperature is around 50 ~ 60 degree

Celsius under full condition.

C) Loosen the thumb screws of the power module

D) Remove the defective power module by pulling out

***WARNING:

Please put aside the power module for cooling down. Prevent other people from

touching it until it cools down.

E) Replace with a functional power module and insert it into the power system

to the end.