Cecotec Conga 1790 Ultra [38/136] Operation

ENGLISH

until it clicks to make sure they are properly xed.

Fig. 22

Press the power switch located on the bottom part of the robot. Make sure the power switch

is turned On.

Fig. 23

Place the robot on the charging base and make sure the charging terminals on the robot match

with those of the charging base. Once the robot is properly placed, it will beep once and the

power button will light up If the light blinks orange, it means the battery is not completely

charged. To ensure maximum cleaning time, wait until the light switches to steady blue. This

will indicate the battery is fully charged and that the robot is ready to clean.

Fig. 24

3. OPERATION

Start cleaning

Long press the power button on the robot to activate the robot up.

Press the power button on the robot or on the remote control to start cleaning.

Note: If the robot runs out of battery during cleaning, it will automatically return to the charging

base. Once the battery is fully charged, the robot can start a new cleaning cycle.

Warning: If there is no good access to the charging base, the robot will not be able to return to

its charging position. In that case, once the robot has stopped, take it manually to the charging

base.

Pause

Press the power button on the robot or on the remote control to pause the cleaning process.

Press the power button on the robot or on the remote control to resume the cleaning process.

Fig. 25

Return to the charging base

Press the back home button on the robot or on the remote control in order to send the robot

to the charging base.

Turn off

Long press the power button to turn the robot off.

Fig. 26

Warning: The robot vacuum cleaner has a power switch located on its main body. If the robot

is not going to be used for long periods of time, it is suggested to switch it off. If the robot is

switched off, it will restore factory default settings as a safety measure. The robot will only