Cecotec Mambo 9590 [45/53] Operation

ENGLISH

5. OPERATION

On/off

Use this switch to switch the product on and off.

Start/pause

Fig. 20

Press the knob on the product’s front part to activate the device.

From the main display, select the desired function.

During the conguration process, hold down the knob for 2 seconds to reset all the settings.

While it is cooking, press the knob to stop it and long-press it for 2 seconds to reset all settings.

After 10 minutes of no operation, the device will enter standby mode.

Once the desired setting or program has been selected, press the knob to activate it and the

device will automatically start operating.

During operation, press the knob to pause the cooking process. The display will show “PAUSE”.

You can open the lid, stir or mix food, remove the jar etc. Then, place every element back in its

correct position and press the knob again to resume operation. After 10 minutes in pause, the

device will automatically turn off.

Use the knob to adjust all settings: time, temperature etc. Turn it clockwise to increase the

value and anticlockwise to decrease it.

Timer

The display shows time as: hour:minutes:seconds.

Press the timer button once, the minute digits will ash. Turn the knob left or right to adjust the

desired minutes. Press it again to switch to seconds, the seconds digits will ash. Press it again

to switch to hours. Turn the knob left or right to adjust the desired hours.

During operation, press the timer button and the device will start counting down automatically.

If the timer has not been set, the product will operate with the preset times:

Heating (without blending): Max. 12 hours.

Blending (speed 1-4): Max 1 hour.

Beat (speed 5-10): Max. 5 mins.

Speed

Press this button to enter speed-setting mode. The speed icon will ash on the display.

Turn the knob left to decrease speed and right to increase it, from level 1 to 10.

If the selected speed is 5-10, the timer will only be set up to 5 minutes. For the rest of the speed

options, 1 hour.

Warning: When speed changes from 5 to 6 or when the device starts working, the device could

emit some noise. This is completely normal and does not affect the device’s operation.