Ariston 7HPF 640S [7/24] Start up and use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ariston 7HPF 640S [7/24] Start up and use

Hotpoint-Ariston KIS 644 DD Z S [7/24] Start up and use
GB
7
! The position of the corresponding gas burner or
electric hotplate* is shown on every knob.
Gas burners
Each burner can be adjusted to one of the following
settings using the corresponding control knob:
• Off
Maximum
Minimum
To turn on one of the burners, place a lighted match
or lighter near the burner, press the knob all the way
in and turn it anti-clockwise to the "High" setting.
On those models fitted with a safety device, the
knob must be pressed in for about 6 seconds until
the device that keeps the flame lit warms up.
On those models fitted with an ignitor, the ignition
button, identified by the
symbol, must first be
pressed and then the corresponding knob pushed
all the way in and turned anti-clockwise to the "High"
setting.
Some models are equipped with an ignition button
incorporated into the control knob. If this is the case,
the ignitor is present, but not the button.
To light a burner, simply press the corresponding
knob all the way in and then turn it anti-clockwise to
the "High" setting, keeping it pressed in until the
burner lights.
! If a flame is accidentally extinguished, turn off the
control knob and wait for at least 1 minute before
trying to relight it.
To switch off the burner, turn the knob in a clockwise
direction until it stops (when reaches the “•” position).
Start-up and use
*
Only available on certain models.
Practical advice on using the burners
To ensure the burners operate efficiently:
• Use appropriate cookware for each burner (see
table) so that the flames do not extend beyond
the bottom of the cookware.
• Always use cookware with a flat base and a
cover.
• When the contents of the pan reach boiling point,
turn the knob to minimum.
Burner ø Cookware diameter (cm)
Fast (R) 24 - 26
Semi Fast (S) 16 - 20
Auxiliary (A) 10 - 14
To identify the type of burner, refer to the designs in
the section entitled, "Burner and Nozzle
Specifications".

Содержание

Похожие устройства

Start up and use The position of the corresponding gas burner or electric hotplate is shown on every knob Gas burners Each burner can be adjusted to one of the following settings using the corresponding control knob Off d Maximum 6 Minimum Practical advice on using the burners GB To ensure the burners operate efficiently Use appropriate cookware for each burner see table so that the flames do not extend beyond the bottom of the cookware Always use cookware with a flat base and a cover When the contents of the pan reach boiling point turn the knob to minimum Burner To turn on one of the burners place a lighted match or lighter near the burner press the knob all the way in and turn it anti clockwise to the High setting On those models fitted with a safety device the knob must be pressed in for about 6 seconds until the device that keeps the flame lit warms up On those models fitted with an ignitor the ignition button identified by the symbol must first be o Cookware diameter cm Fast R 24 26 Semi Fast S 16 20 Auxiliary A 10 14 To identify the type of burner refer to the designs in the section entitled Burner and Nozzle Specifications pressed and then the corresponding knob pushed all the way in and turned anti clockwise to the High setting Some models are equipped with an ignition button incorporated into the control knob If this is the case the ignitor is present but not the button To light a burner simply press the corresponding knob all the way in and then turn it anti clockwise to the High setting keeping it pressed in until the burner lights If a flame is accidentally extinguished turn off the control knob and wait for at least 1 minute before trying to relight it To switch off the burner turn the knob in a clockwise direction until it stops when reaches the position Only available on certain models 7

Скачать