Home
Главная
Ariston
Варочная Панель
7HKRO 642 D X
Инструкция по эксплуатации Страница: 7

Ariston 7HKRO 642 D X [7/28] Switching off the cooking zones

Start-up and use

! The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

! A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.

! If the

- or

+ button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the button

for approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector

button

and a power adjustment device

consisting of power level selector buttons between

the values of 0 and 9.

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level using the power level selector buttons

between 0 and 9.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button

and:

• Press power level selector button 0: this

immediately returns the power setting to 0 and the

cooking zone switches off.

Power function

The power function for the cooking zones may be

used to shorten heating-up times. Activate and set

the power level for the desired cooking zone

described in the previous paragraph. Press and hold

the selector button corresponding to the desired

cooking zone

for at least 2 seconds. The

display, the power level indicator, will alternately

show the letter “

P” and the power level set

previously until the desired power level has been

reached. Once this level has been reached, the

display will revert to showing the set power level. To

deactivate this function, press and hold – for at least

2 seconds - the selector button corresponding to the

cooking zone on which the

function has been

activated; alternatively, select a different power level

between 0 and 9 using the power level selector

buttons.

Heating elements

Two types of heating element may be installed,

depending on the appliance model: halogen and

radiant elements.

Halogen elements emit heat via radiation from the

halogen lamps they contain.

They have similar properties to gas burners: they are

easy to control and reach set temperatures quickly,

allowing you to see the power level instantly.

Radiant elements consist of a series of coils which

allow heat to be distributed evenly at the base of the

cookware, so that all slow-flame cooking may be

performed successfully, for example stews, sauces

or reheated dishes.

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level.

3. Press the

programming button. The indicator

light corresponding to the selected zone will start

flashing.

4. Set the cooking duration using the

- and

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A

buzzer sounds for approximately 1 minute and the

cooking zone switches off when the set programme

has finished.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the

display will show the data for the hotplate with the

Ariston 7HKRO 642 D X [7/28] Switching off the cooking zones

Содержание

Похожие устройства