Systemair RVK 200E2 sileo 1ph/230V [15/18] Cleaning

Cleaning |

♦ When ordering spare parts, please specify the serial number of the fan. This can be found on the name plate.

12 Cleaning

12.1 Safety information

♦ Cleaning may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 1.

♦ Wear protective equipment during all work in the vicinity of the fan, details see 2.2 Personal protective equipment,

page 2.

♦ Observe the 5 rules of electrical safety, see 2.3 5 rules of electrical safety, page 2.

♦ Ensure that the power supply has been switched off (all-pole circuit breaker).

♦ The impeller must be at a standstill.

12.2 Procedure

Important

Keeping the fan clean extends its service life.

♦ Install a filter monitor.

♦ Do not use steel brushes or sharp-edged objects.

♦ Do not use a high-pressure cleaner (steam jet cleaner) under any circumstances.

♦ Do not bend the fan blades when cleaning.

♦ When cleaning the impeller, pay attention to balance weights that have been positioned

♦ Keep the airways of the fan clear and clean them if necessary with a brush.

13 Deinstallation/dismantling

Deinstall and dismantle the fan in reverse order of installation and electrical connection.

14 Disposal

♦ Ensure material is recycled. Observe national regulations.

♦ The device and the transport packaging are predominantly made from recyclable raw materials.

♦ Disassemble the fan into its components.

♦ Separate the parts according to:

• reusable material

• material groups to be disposed of (metal, plastics, electrical parts, etc.)

15 Regulation 1253/2014

Regulation 1253/2014

You have bought a ventilation unit which underlies the regulation 1253/2014. This regulation rules the requirements to

the environmental design of ventilation units!

Operation of the ventilation unit as a residential ventilation unit (RVU)

directive of the regulation:

• minimum 3-step speed control (steps 0,1,2,3).

• sensor (for example for humidity or temperature)

| 002