Planet VIP-882 [34/80] Advance setting to h 23 protocol

Advance Setting to H.323 protocol

In Advanced Setting , GW provides user three major parts function to configure:

One is “VoIP Advance”, the other one is “Telephone Advance” and “Network Advance”

H.323 VoIP Advance Configurtion

Smart-QoS

If this function is enabled, when VoIP call is occurred, the

other data will be automatically reduced traffic which

across the internet in order to guarantee the voice

bandwidth.

DTMF Relay for H.323

After the VoIP call is connected, when you dial a digit, this

digit is sent to the other side by DTMF tone. There are two

methods of sending the DTMF tone. The first is “in band”,

that is, sending the DTMF tone in the voice packet. The

other is “out band”, that is, sending the DTMF tone as a

signal. Sending DTMF tone as a signal could tolerate more

packet loss caused by the network. If this selection is

enabled, the DTMF tone will be sent as a signal.

H.323 Start Mode

This selection could force the Gateway to use normal start

mode (default mode) or fast start mode when establishing

a VoIP call. Many other gateways only support normal start

mode, enable this selection when it is necessary. The

default is disabled (using fast start mode).

H.323 H.245 Tunneling

This selection could force the Gateway to use normal start

mode (default mode) or fast start mode when establishing

a VoIP call. Many other gateways only support normal start

mode, enable this selection when it is necessary. The

default is disabled (using fast start mode).