Cecotec 3D ForceAnodized 750 Smart [18/37] Troubleshooting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Cecotec 3D ForceAnodized 750 Smart [18/37] Troubleshooting

Cecotec 3D ForceAnodized 750 Smart [18/37] Troubleshooting
ENGLISH
18 3D FORCEANODIZED 750 SMART
6. TROUBLESHOOTING
Problem Possible cause Solution
Not enough or too much
heat.
The temperature knob is
not set correctly or it is
unplugged.
Set the temperature knob
to the correct position.
No steam or leakage.
The temperature knob has
been set to MIN.
Steam burst or vertical
steam do not work properly.
The steam-burst function
has been used too often
within a very short period.
The iron is not hot enough.
Continue ironing in
horizontal position and
wait a few minutes before
using the vertical steam-
burst function again.
Water leaks from the
soleplate.
The steam and thermostat
knob is set at “0”.
Set the temperature and
steam knob correctly.
The iron is not hot enough.
Press the steam button
only after the indicator light
turns off.
Water is over the max mark. Empty the left-over water.
Little steam.
Check if the steam knob is in
the correct position.
Set the steam knob to the
proper position.
Steam holes are blocked.
Clean the hole with distilled
water.
Too little water in the water
tank.
Add water to the water
tank.
Spray does not work
properly.
Not enough pressure or air
inside.
Press the spray nozzle
manually and press the
spray button several times
in a row.
7. TECHNICAL SPECIFICATIONS
Model: 3D ForceAnodized 750 Smart
Reference No: 05103
3100 W, 230 V, 50 Hz
Made in China | Designed in Spain

Содержание

Похожие устройства

Скачать