SilverStone ST85F-GS [4/12] Manual st85f gs p158 st75f gs p159 p3

2.3 Output Ripple

2.3.1 Ripple regulation

2.3.2 Definition

The ripple voltage of the outputs shall be measured at the pins of the output connector

when terminated in the load impedance specified in figure 1. Ripple and noise are

measured at the connectors with a 0.1uF ceramic capacitor and a 10uF electrolytic

capacitor to simulate system loading. Ripple shall be measured under any condition of

line voltage, output load, line frequency,operation temperature.

1.Maximum continuous total DC output power should not exceed 850W.

2.Maximum c.ontinuous combined load on +3.3VDC and +5VDC outputs shall not exceed

150W.

3.Maximum combined current for the +12V outputs shall be 70A(840W).

4.When +12V is load to 28A , -12V minimum load is 0.02A.

5.Peak total DC output power should not exceed 900W.

6.Peak power can be supported for 12 second.

2.2.2: SST-ST85F-GS Load Range

Parameter

+3.3V

+5V

+12V

-12V

+5VSB

Min

0.5

0.3

0.1

Nom.

Max

0.3

3.5

Unit

Amps