Grundig 47 VLE 988 BL [9/26] English 10
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig 47 VLE 988 BL [9/26] English 10

Grundig 47 VLE 988 BL [9/26] English 10
ENGLISH
10
Tuning terrestrial television channels
(DVB-T)
1 In the »Source Setup« menu, in the »Connection Type«
line, select the option »Air« with »
<
« or »
>
«.
2 Select the line »Scan Type« with »
V
« or »
Λ
«.
Use »
<
« or »
>
« to set the required scan type:
– »DTV«, scan for digital television channels;
– »ATV«, scan for analogue television channels;
–
»ATV & DTV«, scan for analogue and digital televi-
sion channels.
Caution:
7
The antenna power supply (5V ) may only be
switched on if the antenna is an active indoor antenna
with a signal amplifier and it is not already supplied with
a voltage via a mains plug (or similar supply). Otherwise
you may cause a short circuit and irreparably damage
your antenna.
3
Select the line »Active Antenna Power« with
»
V
« or
»
Λ
«.
Switch on the antenna power supply for the antenna with
»
<
« or »
>
« (»On«).
4 Start the scan with »

« (green).
– The »Search Results« menu appears, and the search for
TV channels begins.
– Depending on the number of television channels re-
ceived, this can easily take a few minutes.
– The scan is complete as soon as the »PROGRAM TABLE«
appears.
Note:
7
You can abort the scan by pressing »MENU«.
5 Press »MENU« to end the setting.
Note:
7
Before recording HD channels, please check signal qual-
ity and strength, see chapter "Displaying signal informa-
tion" in the "Detailed Manual". If the level is displayed
in green, you can record HD channels without any prob-
lems.
Tuning television channels from the
cable provider (DVB-C)
1 In the »Source Setup« menu, in the »Connection Type«
line, select the option »Cable« with »
<
« or »
>
«.
2 Select the line »Scan Type« with »
V
« or »
Λ
«.
Use »
<
« or »
>
« to set the required scan type:
– »DTV«, scan for digital television channels;
– »ATV«, scan for analogue television channels;
–
»ATV & DTV«, scan for analogue and digital televi-
sion channels.
3 Select the line »Cabel Scan Type« with »
V
« or »
Λ
«.
Select the preferred option (»Quick« or »Full«) with »
<
«
or »
>
«.
– The search function »
Quick
« sets up the channels accord-
ing to the information provided by your cable provider in
the transmission signal.
– If the option »Full« is selected, the entire frequency range
will be scanned. The search can take a long time with
this option. This option is recommended if your cable pro-
vider does not support the scan type
»
Quick
«
.
Note:
7
You can accelerate the search. To do this, you need in-
formation about the frequency and
network ID. You are
usually able to get this data from your cable operator or
find it in forums on the Internet.
4 Start the scan with »

« (green).
–
The »Search Results« menu appears, and the search for
TV channels begins.
– Depending on the number of television channels re-
ceived, this can easily take a few minutes.
– The scan is complete as soon as the »PROGRAM TABLE«
appears.
Note:
7
You can abort the scan by pressing »MENU«.
5 Press »MENU« to end the setting.
SETTINGS
-----------------------------------------------------------------------------------------------------------------------------------------

Содержание

Похожие устройства

Скачать